Superstock 350/295 engine

amp vette · 12-15-2022, 03:28 PM

Superstock 350/295 unassembled engine originally built by Hettler-Bowtie block,New .060 Bore and Hone, Bushed lifter bores, 55 mm cam tunnel by Weston Machine, 041 Heads with welded exhaust redone by Dave Jack, Jesel Rockers, ATI Balancer, Jesel Belt Drive, Dart Manifold port matched to heads.
Following are all brand new parts-
(10) CP Pistons with Pins, Two sets of total seal rings, Manley NHRA legal Pro I-Beam rods, Compstar Callies small jrn crank, Chowler lifters, ManleySD valves, Jesel belt, H Bearings, Moroso Superstock big box alum
pan w/pump
Needs valvesprings, pushrods,gaskets and balancing to complete.
Over $15,000.00 parts and machine work.

$13000.00 or B/O

732 266-2598

12-15-2022, 03:28 PM	#1
amp vette Junior Member Join Date: Jun 2017 Posts: 4 Likes: 0 Liked 1 Time in 1 Post	Superstock 350/295 engine Superstock 350/295 unassembled engine originally built by Hettler-Bowtie block,New .060 Bore and Hone, Bushed lifter bores, 55 mm cam tunnel by Weston Machine, 041 Heads with welded exhaust redone by Dave Jack, Jesel Rockers, ATI Balancer, Jesel Belt Drive, Dart Manifold port matched to heads. Following are all brand new parts- (10) CP Pistons with Pins, Two sets of total seal rings, Manley NHRA legal Pro I-Beam rods, Compstar Callies small jrn crank, Chowler lifters, ManleySD valves, Jesel belt, H Bearings, Moroso Superstock big box alum pan w/pump Needs valvesprings, pushrods,gaskets and balancing to complete. Over $15,000.00 parts and machine work. $13000.00 or B/O 732 266-2598 Last edited by amp vette; 12-15-2022 at 03:37 PM.