Hydraulic lifter conversion recommended valve lash

stocker396 · 04-03-2019, 05:07 PM

Just converted my old Shubecks from hydraulic to solid. Still running a hydraulic profile cam. Bullet brand cam

The question is what lash should I set it at now?

I was between .0 and .003 before

Billy Nees · 04-03-2019, 06:06 PM

.006 and .010 works for me!

gsa612 · 04-03-2019, 08:39 PM

What was the open spring press.with the Shubecks?.If it was 400+you will not be able to run that with a uncoated solid lifter on the same cam.As far as lash .006-.008. gsa612

Rsmith38 · 04-04-2019, 08:59 AM

Call John Partridge

04-03-2019, 05:07 PM	#1
stocker396 Member Join Date: Dec 2013 Location: Santa Fe TEXAS Posts: 107 Likes: 2 Liked 57 Times in 15 Posts	Hydraulic lifter conversion recommended valve lash Just converted my old Shubecks from hydraulic to solid. Still running a hydraulic profile cam. Bullet brand cam The question is what lash should I set it at now? I was between .0 and .003 before __________________ Overkill is Under-rated

04-03-2019, 06:06 PM	#2
Billy Nees VIP Member Join Date: Oct 2002 Location: On a hilltop in Pa. Posts: 4,223 Likes: 3,103 Liked 6,791 Times in 1,524 Posts	Re: Hydraulic lifter conversion recommended valve lash .006 and .010 works for me! __________________ Billy Nees 1188 STK, SS World's greatest Under-Achiever!

04-03-2019, 08:39 PM	#3
gsa612 Senior Member Join Date: Jan 2008 Location: 100th Meridian Posts: 570 Likes: 116 Liked 280 Times in 139 Posts	Re: Hydraulic lifter conversion recommended valve lash What was the open spring press.with the Shubecks?.If it was 400+you will not be able to run that with a uncoated solid lifter on the same cam.As far as lash .006-.008. gsa612

04-04-2019, 08:59 AM	#4
Rsmith38 Member Join Date: Mar 2011 Posts: 186 Likes: 0 Liked 28 Times in 15 Posts	Re: Hydraulic lifter conversion recommended valve lash Call John Partridge