|
|
07-20-2019, 01:48 PM | #1 |
Member
Join Date: Nov 2008
Posts: 287
Likes: 3
Liked 16 Times in 14 Posts
|
Metric 200 help?
Just installed 3-speed mcclay 200 metric with brake. Attended Atlanta points race and ran TNT on Friday night to get familiar with 3-speed from PG. On third pass something happened internally. Car will not move in low gear. Acts like trans brake engaged. Pulls in other gears ok. Trans fluid smelled ok, no burnt or discoloration. Thought trans brake switch gone bad so I checked voltage on wire unplugged from trans. Everything checked out ok. Bought used and Jack Sepanek sp? freshen approximately 30 runs ago. Any idea of what could be going on? Will be calling Jack first of next week.
Ed |
07-20-2019, 06:48 PM | #2 |
Senior Member
Join Date: Feb 2002
Location: Southeast Michigan
Posts: 888
Likes: 63
Liked 224 Times in 103 Posts
|
Re: Metric 200 help?
Might be the solenoid is stuck in the applied position . Car moves in Second and High ?
|
07-20-2019, 08:41 PM | #3 |
VIP Member
Join Date: Feb 2004
Location: LONG ISLAND N.Y.
Posts: 1,596
Likes: 2,934
Liked 1,610 Times in 377 Posts
|
Re: Metric 200 help?
Broke the sprag
__________________
james perrone 1290 STK |
Liked |
07-20-2019, 11:26 PM | #4 |
Veteran Member
Join Date: Mar 2002
Location: Miles From Nowhere
Posts: 7,420
Likes: 2,586
Liked 4,455 Times in 1,695 Posts
|
Re: Metric 200 help?
There would be metal everywhere, including on the dip stick, yes?
__________________
We are lucky we don't get as much Government as we pay for..... Will Rogers |
07-20-2019, 11:47 PM | #5 |
VIP Member
Join Date: Oct 2002
Location: Greater Boston
Posts: 1,476
Likes: 982
Liked 778 Times in 175 Posts
|
Re: Metric 200 help?
Broke the sprag. Happened to my 200 and there was no sign of anything until the tranny came apart. Same symptom - no first gear.
__________________
Bob Don 128 SS |
07-21-2019, 10:34 AM | #6 | |
Senior Member
Join Date: Feb 2002
Location: Southeast Michigan
Posts: 888
Likes: 63
Liked 224 Times in 103 Posts
|
Re: Metric 200 help?
Quote:
On a 200 if the roller clutch was broken or wouldn't hold then there would be no 1st gear , but if the low/rev clutch was applied it may be able to move in low range . The low roller clutch and the low/rev clutch hold the same gearset when they work . In 2nd and 3rd gear they need to free wheel or the tranny will lock up . Ed's trans moves in 2nd and 3rd gear so neither of those are applied . |
|
07-20-2019, 10:20 PM | #7 |
Member
Join Date: Nov 2008
Posts: 287
Likes: 3
Liked 16 Times in 14 Posts
|
Re: Metric 200 help?
|
|
|