|
10-22-2009, 12:53 PM | #1 |
VIP Member
Join Date: Jan 2005
Location: Where the Green Grass Grows, AL
Posts: 2,375
Likes: 0
Liked 3 Times in 3 Posts
|
TH-350, how long should the shift take.
What i mean is how long (in seconds) should the shifts take in a stocker prepped TH350. Judging by my datalogs its take .3 seconds. I am looking at the highpoint of first gear, to the lowest point immediately after the shift, same thing for the 2/3 shift. I am thinking it may be shifting slow, and thus losing some. any idea?
__________________
Chad Rhodes 2113 I/SA |
10-22-2009, 01:56 PM | #2 | |
Member
Join Date: Jul 2005
Location: Hendersonville, TN 37075
Posts: 214
Likes: 1
Liked 28 Times in 11 Posts
|
Re: TH-350, how long should the shift take.
Quote:
Does your datalog also show RPM @ shift? |
|
10-22-2009, 02:01 PM | #3 |
VIP Member
Join Date: Jan 2005
Location: Where the Green Grass Grows, AL
Posts: 2,375
Likes: 0
Liked 3 Times in 3 Posts
|
Re: TH-350, how long should the shift take.
yes it does. however what i am looking at is how long the trans actually takes to make the shift. I'm thinking it should be shifting quicker
__________________
Chad Rhodes 2113 I/SA |
10-22-2009, 02:38 PM | #4 |
Member
Join Date: May 2007
Posts: 123
Likes: 0
Liked 0 Times in 0 Posts
|
Re: TH-350, how long should the shift take.
Sounds more like operator error rather than a mechanical issue. I'd put your dad back in the driver's seat!
|
10-22-2009, 02:40 PM | #5 |
VIP Member
Join Date: Jan 2005
Location: Where the Green Grass Grows, AL
Posts: 2,375
Likes: 0
Liked 3 Times in 3 Posts
|
Re: TH-350, how long should the shift take.
ouch! i was referring to internal transmission functions
__________________
Chad Rhodes 2113 I/SA |
10-22-2009, 02:49 PM | #6 |
Member
Join Date: May 2007
Posts: 123
Likes: 0
Liked 0 Times in 0 Posts
|
Re: TH-350, how long should the shift take.
As apposed to bodily functions?
|
10-23-2009, 07:53 AM | #7 |
Senior Member
Join Date: Sep 2006
Location: Bellevue Ohio
Posts: 985
Likes: 0
Liked 12 Times in 9 Posts
|
Re: TH-350, how long should the shift take.
Could you post you datalogger screen shot? I'd like to look at it I have a XLT 350 that I've been working on that had some issues. It would help to see what you're looking at. Joe
__________________
Joe Buchanan SS/BX 3117 |
10-23-2009, 12:01 PM | #8 |
Member
Join Date: Oct 2002
Location: Magnolia, Texas
Posts: 404
Likes: 1
Liked 461 Times in 61 Posts
|
Re: TH-350, how long should the shift take.
.25 1-2 500 drop
.32 2-3 1208 drop Bill |
10-23-2009, 12:19 PM | #9 |
VIP Member
Join Date: Jan 2005
Location: Where the Green Grass Grows, AL
Posts: 2,375
Likes: 0
Liked 3 Times in 3 Posts
|
Re: TH-350, how long should the shift take.
Thanks Bill, on the 1-2 I'm assuming it goes back into the converter a bit? i know I've been shifting too high on ours, going to remedy that
__________________
Chad Rhodes 2113 I/SA |
10-23-2009, 12:32 PM | #10 |
VIP Member
Join Date: Jan 2005
Location: Where the Green Grass Grows, AL
Posts: 2,375
Likes: 0
Liked 3 Times in 3 Posts
|
Re: TH-350, how long should the shift take.
the red line is the RPM
__________________
Chad Rhodes 2113 I/SA |
|
|