how much to add to delay box for full tree

[rognelson777]

Considering testing at local gamblers race which is full tree. What is the time to add to the delay box for a full tree? also, what are current nhra division 1 divisional race super gas tree .370 or . 400?

[C and W Racing]

Originally Posted by rognelson777

Considering testing at local gamblers race which is full tree. What is the time to add to the delay box for a full tree? also, what are current nhra division 1 divisional race super gas tree .370 or . 400?

Most tree's are .370, as far as how much delay on a full tree, it depends on how well your car reacts. If you can cut a light on a pro tree and carry some delay to do it, I would start at around 1.150. When I did bracket race, I would usually be in the 1.160-1.170 range. That being said, I usually carry 30 to 40 numbers on a pro tree.
Chuck

[THE LEGEND]

good starting point would be 1.120 -1125

[Bill Baer]

Originally Posted by THE LEGEND

good starting point would be 1.120 -1125

Sounds about right! Make sure you understand how cross talk works or how to signify that you don't want to use it. It's definately different!

[GaryGoFast]

Originally Posted by C and W Racing

Most tree's are .370, as far as how much delay on a full tree, it depends on how well your car reacts. If you can cut a light on a pro tree and carry some delay to do it, I would start at around 1.150. When I did bracket race, I would usually be in the 1.160-1.170 range. That being said, I usually carry 30 to 40 numbers on a pro tree.
Chuck

Dam Chuck, that bad boy bangs the tree!