10 Bolt Dropout 4.11 Gear

Sean Marconette · 12-23-2015, 01:10 PM

I have a friend looking for a 4.11 street gear for a 10 bolt dropout. Does anyone have anything like this or a known vendor. It looks to have an odd 17 spline pinion.

Thanks for any help!

Sean

Dragsinger · 12-23-2015, 01:59 PM

Sean,

are you speaking of a Chevy 3rd member? If so, that unit fits 1955 - 1964 Chevy cars. Parts are out there for those.

Sean Marconette · 12-23-2015, 02:37 PM

Hi Larry!

Yes that's what he has,

It looks like the 4.11 gear is an odd one to find. I found an entire posi and gear kit, but not just the gear set by itself? He has everything but his gears are junk.He has called vendors and has not had much luck.

Thanks
Sean

FED 387 · 12-23-2015, 05:01 PM

SEan-- check your PM- FED 387

Sean Marconette · 12-23-2015, 06:39 PM

Thanks for the help. It's always a pleasure to know help is available here!

Sean

Aubrey N Bruneau · 12-24-2015, 10:45 AM

4.11's , 4.56's are readily available new. In fact, I believe that Richmond is making the 3 series gear sets as well.
There are also modern re-enforcement upgrades for these rear ends.

56sedandelivery · 01-11-2016, 12:17 AM

4.11 factory ring gears are pretty narrow (weak), but that's what the 3-speed overdrive transmission cars came with. Gears are still available new from the aftermarket, but this is an area where E-Bay is your friend. I have a bunch of the 55-64 dropout third member stuff; just gave away an open 3.70 unit and a set of new Schiefer 5.57 gears. Go to BruneauPerformance.Ca (a Canadian site), he has stuff also for these rears. Butch/56sedandelivery.

Sean Marconette · 01-11-2016, 12:35 AM

Thanks for everyone's PM's and responses!

I think my friend has this taken care of now. We found someone with several new gear sets on ebay. The car is just a driver, and I guess it had this setup when he started the build.

Thanks
Sean

12-23-2015, 01:10 PM	#1
Sean Marconette Senior Member Join Date: Mar 2006 Posts: 958 Likes: 618 Liked 165 Times in 60 Posts	10 Bolt Dropout 4.11 Gear I have a friend looking for a 4.11 street gear for a 10 bolt dropout. Does anyone have anything like this or a known vendor. It looks to have an odd 17 spline pinion. Thanks for any help! Sean __________________ Sean Marconette 84 Mustang 5060 SS/N

12-23-2015, 01:59 PM	#2
Dragsinger VIP Member Join Date: Jul 2008 Location: Liberty City [East Texas] Posts: 1,759 Likes: 5 Liked 99 Times in 60 Posts	Re: 10 Bolt Dropout 4.11 Gear Sean, are you speaking of a Chevy 3rd member? If so, that unit fits 1955 - 1964 Chevy cars. Parts are out there for those. __________________ Larry Woodfin 471W

12-23-2015, 02:37 PM	#3
Sean Marconette Senior Member Join Date: Mar 2006 Posts: 958 Likes: 618 Liked 165 Times in 60 Posts	Re: 10 Bolt Dropout 4.11 Gear Hi Larry! Yes that's what he has, It looks like the 4.11 gear is an odd one to find. I found an entire posi and gear kit, but not just the gear set by itself? He has everything but his gears are junk.He has called vendors and has not had much luck. Thanks Sean __________________ Sean Marconette 84 Mustang 5060 SS/N

12-23-2015, 05:01 PM	#4
FED 387 VIP Member Join Date: Jun 2006 Posts: 3,349 Likes: 328 Liked 280 Times in 150 Posts	Re: 10 Bolt Dropout 4.11 Gear SEan-- check your PM- FED 387

12-23-2015, 06:39 PM	#5
Sean Marconette Senior Member Join Date: Mar 2006 Posts: 958 Likes: 618 Liked 165 Times in 60 Posts	Re: 10 Bolt Dropout 4.11 Gear Thanks for the help. It's always a pleasure to know help is available here! Sean __________________ Sean Marconette 84 Mustang 5060 SS/N

12-24-2015, 10:45 AM	#6
Aubrey N Bruneau Member Join Date: Sep 2003 Location: South Eastern Alberta, Canada Posts: 311 Likes: 6 Liked 7 Times in 3 Posts	Re: 10 Bolt Dropout 4.11 Gear 4.11's , 4.56's are readily available new. In fact, I believe that Richmond is making the 3 series gear sets as well. There are also modern re-enforcement upgrades for these rear ends. __________________ Aubrey N Bruneau 6409 C/S 62 BelAir sport coupe, 409 HP 409

01-11-2016, 12:17 AM	#7
56sedandelivery Junior Member Join Date: Feb 2008 Posts: 21 Likes: 0 Liked 0 Times in 0 Posts	Re: 10 Bolt Dropout 4.11 Gear 4.11 factory ring gears are pretty narrow (weak), but that's what the 3-speed overdrive transmission cars came with. Gears are still available new from the aftermarket, but this is an area where E-Bay is your friend. I have a bunch of the 55-64 dropout third member stuff; just gave away an open 3.70 unit and a set of new Schiefer 5.57 gears. Go to BruneauPerformance.Ca (a Canadian site), he has stuff also for these rears. Butch/56sedandelivery.

01-11-2016, 12:35 AM	#8
Sean Marconette Senior Member Join Date: Mar 2006 Posts: 958 Likes: 618 Liked 165 Times in 60 Posts	Re: 10 Bolt Dropout 4.11 Gear Thanks for everyone's PM's and responses! I think my friend has this taken care of now. We found someone with several new gear sets on ebay. The car is just a driver, and I guess it had this setup when he started the build. Thanks Sean __________________ Sean Marconette 84 Mustang 5060 SS/N