|
01-22-2018, 06:25 PM | #1 |
Veteran Member
Join Date: Mar 2002
Location: Miles From Nowhere
Posts: 7,415
Likes: 2,581
Liked 4,447 Times in 1,693 Posts
|
LS Hydraulic Rollers
I'm in need of 12 of the Chevrolet GM Performance lifters for a V6 project.
Part # 88958689 All I've found is sets of 16 (Scoggins-Dickey, etc.) These could be take outs from a S/S engine, as long as they're new. Any ideas /suggestions? Thanks in advance. 602-769-0346 myac455@gmail.com
__________________
We are lucky we don't get as much Government as we pay for..... Will Rogers |
01-22-2018, 07:41 PM | #2 | |
VIP Member
Join Date: Feb 2014
Location: Derby City, USA
Posts: 3,327
Likes: 858
Liked 6,609 Times in 1,288 Posts
|
Re: LS Hydraulic Rollers
Quote:
|
|
01-22-2018, 08:29 PM | #3 |
Veteran Member
Join Date: Mar 2002
Location: Miles From Nowhere
Posts: 7,415
Likes: 2,581
Liked 4,447 Times in 1,693 Posts
|
Re: LS Hydraulic Rollers
For...??? Wall ornaments?
Thanks for the btt
__________________
We are lucky we don't get as much Government as we pay for..... Will Rogers |
01-23-2018, 07:59 PM | #4 |
Member
Join Date: Jan 2002
Location: Sedalia, Mo
Posts: 427
Likes: 280
Liked 290 Times in 58 Posts
|
Re: LS Hydraulic Rollers
Looks like a V/SA project.
__________________
Bob Shaw V/SA 515 |
01-23-2018, 09:30 PM | #5 |
Veteran Member
Join Date: Mar 2002
Location: Miles From Nowhere
Posts: 7,415
Likes: 2,581
Liked 4,447 Times in 1,693 Posts
|
Re: LS Hydraulic Rollers
It does, doesn't it? But it's not. Of course that would be V/Stick anyway.
No, it's a 231 Buick. Same roller from the GM parts bin.
__________________
We are lucky we don't get as much Government as we pay for..... Will Rogers |
01-24-2018, 09:23 AM | #6 |
Senior Member
Join Date: Feb 2002
Location: Southeast Michigan
Posts: 885
Likes: 63
Liked 221 Times in 102 Posts
|
Re: LS Hydraulic Rollers
Just an FYI , I have been rebuilding a 3800 for a Firebird street car and discovered that while the lifters look the same between the 3800 and the Chevy lifters , the pushrod seat is different . You will need about a .100 shorter pushrod if you use a Chevy lifter .
|
01-24-2018, 12:50 PM | #7 | |
Veteran Member
Join Date: Mar 2002
Location: Miles From Nowhere
Posts: 7,415
Likes: 2,581
Liked 4,447 Times in 1,693 Posts
|
Re: LS Hydraulic Rollers
Quote:
I planned on new push rods too, ordered to the length I'll need, so we'll pick up on that, at that time. The checking lifter we have is from an LS build too, so should be all good.
__________________
We are lucky we don't get as much Government as we pay for..... Will Rogers |
|
01-30-2018, 01:17 AM | #8 |
Veteran Member
Join Date: Mar 2002
Location: Miles From Nowhere
Posts: 7,415
Likes: 2,581
Liked 4,447 Times in 1,693 Posts
|
Re: LS Hydraulic Rollers
Still looking....
Question for the engine builders / COPO owners } Did all the LS COPO cars come with the close tolerance "bowtie" hyd. roller lifters ? How about the 2018 cars, now that the rule changed? I assume they are replaced with a solid roller for Super / Stock.
__________________
We are lucky we don't get as much Government as we pay for..... Will Rogers |
01-30-2018, 01:39 AM | #9 | |
Member
|
Re: LS Hydraulic Rollers
Quote:
If you are looking for a good cheep LS lifter the Stock LS7’s are hard to beat for the price. I would be shocked if you can find only 12 just buy 16 and call it a day.
__________________
Ross Gregory 5133 Stock,Super Stock 53 Top Dragster |
|
01-30-2018, 08:53 AM | #10 |
Member
Join Date: Oct 2014
Posts: 172
Likes: 669
Liked 22 Times in 14 Posts
|
Re: LS Hydraulic Rollers
https://zzperformance.com/3800/camsh...7-lifters.html
Mark, take a look at these. Rick Thomaosn GTOMayhem |
|
|