142 tooth starter question

Dave Casey · 09-10-2007, 08:56 PM

Has anyone ever put a 142 tooth flywheel on a BBC or SBC and put the starter in the stock(passenger side) location?. I quickly looked at it and maybe the starter can be moved in the needed amount. Any help would be appreciated.

Dave

Jeff Lee · 12-10-2008, 12:46 PM

Dave,
Rob @ Advanced Clutches now has a 142 tooth flywheel that will work in a stock location (chevy) starter. The starter is being developed by Meziere. I spoke to Rob yesterday and he already has a few of these flywheel & clutch assemblies on order. I made an inquiry with Meziere yesterday about getting a starter for my AMC to use the same 142 tooth starter.

Greg Porter · 12-20-2008, 12:40 PM

Dave,

The 142 starter has been done by GPE Competition Starters for several years, we custom build for any application and would be happy to assist. If you have any more questions give us a call at 405-340-8986.
Thanks, Greg

Jeff Lee · 04-03-2009, 11:06 AM

FYI, I purchased a custom GPE starter for a 142t flywheel. Both Meziere and Tilton didn't want anything to do with it. GPE had it to me in about a week! I think it's a 4HP motor and it was $400.00. The starter gear is BIG!

Al Reed · 04-08-2009, 07:35 AM

Quote:

Originally Posted by Jeff Lee

FYI, I purchased a custom GPE starter for a 142t flywheel. Both Meziere and Tilton didn't want anything to do with it. GPE had it to me in about a week! I think it's a 4HP motor and it was $400.00. The starter gear is BIG!

I looked around and could only find Tilton who did a 142 tooth starter for the left hand drivers side, when using a full length dry sump kickout on the passengers side. So GPE is the other who can?

09-10-2007, 08:56 PM	#1
Dave Casey VIP Member Join Date: Dec 2002 Location: Hampden, MA Posts: 1,150 Likes: 196 Liked 579 Times in 126 Posts	142 tooth starter question Has anyone ever put a 142 tooth flywheel on a BBC or SBC and put the starter in the stock(passenger side) location?. I quickly looked at it and maybe the starter can be moved in the needed amount. Any help would be appreciated. Dave __________________ Dave Casey 1330 STK

12-10-2008, 12:46 PM	#2
Jeff Lee VIP Member Join Date: Jul 2007 Location: Anthem, Arizona Posts: 2,766 Likes: 0 Liked 2 Times in 2 Posts	Re: 142 tooth starter question Dave, Rob @ Advanced Clutches now has a 142 tooth flywheel that will work in a stock location (chevy) starter. The starter is being developed by Meziere. I spoke to Rob yesterday and he already has a few of these flywheel & clutch assemblies on order. I made an inquiry with Meziere yesterday about getting a starter for my AMC to use the same 142 tooth starter. __________________ Jeff Lee 7494 D/S '70 AMX

12-20-2008, 12:40 PM	#3
Greg Porter Junior Member Join Date: Oct 2007 Posts: 2 Likes: 0 Liked 0 Times in 0 Posts	Re: 142 tooth starter question Dave, The 142 starter has been done by GPE Competition Starters for several years, we custom build for any application and would be happy to assist. If you have any more questions give us a call at 405-340-8986. Thanks, Greg

04-03-2009, 11:06 AM	#4
Jeff Lee VIP Member Join Date: Jul 2007 Location: Anthem, Arizona Posts: 2,766 Likes: 0 Liked 2 Times in 2 Posts	Re: 142 tooth starter question FYI, I purchased a custom GPE starter for a 142t flywheel. Both Meziere and Tilton didn't want anything to do with it. GPE had it to me in about a week! I think it's a 4HP motor and it was $400.00. The starter gear is BIG! __________________ Jeff Lee 7494 D/S '70 AMX

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode