Top Sportsman Driveshaft Loop $149.99

TuffGuy · 02-20-2010, 07:56 PM

sold

John Moore · 03-16-2010, 08:37 AM

Our " Loop" from Tuffguy Racing is INSTALLED and I Like it Very Much.

It is a very solid mount to the pinion support. Allows plenty of room for diveshaft sensor and also allows plenty of room to install,tighten and loosen/remove your driveshaft U-joint caps if needed. This is a very versatile piec and I am proud of Brian for making such a quality piece of equipment.

It looks very neat in it's design ,just like it belongs there to begin with.

We used the Dorman 3" studs that have the NF 24 threads 3/8 " with a 3/8" shoulder and the NC 16 3/8 threads to lock the loop down to the studs going into the pinion support.

Thanks Brian for making a nice unit!

02-20-2010, 07:56 PM	#1
TuffGuy Junior Member Join Date: Feb 2010 Posts: 2 Likes: 0 Liked 0 Times in 0 Posts	sold sold Last edited by TuffGuy; 11-02-2021 at 01:44 PM. Reason: no longer available

03-16-2010, 08:37 AM	#2
John Moore Junior Member Join Date: Jun 2002 Location: Kansas Posts: 13 Likes: 0 Liked 0 Times in 0 Posts	Re: Top Sportsman Driveshaft Loop $149.99 Our " Loop" from Tuffguy Racing is INSTALLED and I Like it Very Much. It is a very solid mount to the pinion support. Allows plenty of room for diveshaft sensor and also allows plenty of room to install,tighten and loosen/remove your driveshaft U-joint caps if needed. This is a very versatile piec and I am proud of Brian for making such a quality piece of equipment. It looks very neat in it's design ,just like it belongs there to begin with. We used the Dorman 3" studs that have the NF 24 threads 3/8 " with a 3/8" shoulder and the NC 16 3/8 threads to lock the loop down to the studs going into the pinion support. Thanks Brian for making a nice unit! __________________ John Moore ET 521,S/G 5212,T/S 521