|
03-02-2018, 01:26 PM | #11 |
VIP Member
Join Date: Oct 2008
Posts: 2,114
Likes: 1,078
Liked 180 Times in 110 Posts
|
Re: metric 200 chevy bolt pattern
|
03-02-2018, 06:03 PM | #12 |
Senior Member
Join Date: Feb 2002
Location: Southeast Michigan
Posts: 885
Likes: 63
Liked 221 Times in 102 Posts
|
Re: metric 200 chevy bolt pattern
Way back in the mid 80's when Oldsmobile was out there racing a lot of 307 Cutlass's , the Stockers were running with a 350THM . I was able to get them to give me one so we could develop a 200-4R to race . To use 4th gear, I was running a 5.57 rear gear , most had about a 5.13 . At the time there was no support for the 200/200-4R so converters were a problem . Also a .67 ratio , 4th gear , dragged the engine down too far . The problem was fixed by swapping in a .72 ratio overdrive from a transmission that GM built for BMW . Now there is great support for a 200 , so converters , and lightweight internals are readily available .
|
|
|