904 Pro Trans help

NHRA1285 · 05-28-2013, 04:15 PM

I recently freshened the trans in the Duster and since I have not played with an automatic in so long I can not remember the band adjustments for aluminum drums. I know factory settings are too tight. Any help appreciated. I miss my Jerico. Thank you. Holgar

John Dinkel · 05-28-2013, 10:37 PM

Tighten to 72 inch lbs. back off two turns. Both front and rear.

GTX JOHN · 05-29-2013, 05:57 AM

I can not get a torque wrench in my Duster when
the trans is in..........I go finger tight and back 1 1/2
Turns with a 5.0 ratio band lever or 2 turns with a stock
lever.

05-28-2013, 04:15 PM	#1
NHRA1285 Junior Member Join Date: Jul 2005 Location: Western New York Posts: 24 Likes: 0 Liked 0 Times in 0 Posts	904 Pro Trans help I recently freshened the trans in the Duster and since I have not played with an automatic in so long I can not remember the band adjustments for aluminum drums. I know factory settings are too tight. Any help appreciated. I miss my Jerico. Thank you. Holgar

05-28-2013, 10:37 PM	#2
John Dinkel Senior Member Join Date: Nov 2005 Location: Pinckney, Michigan Posts: 500 Likes: 349 Liked 233 Times in 62 Posts	Re: 904 Pro Trans help Tighten to 72 inch lbs. back off two turns. Both front and rear. __________________ John Dinkel 3295 STK

05-29-2013, 05:57 AM	#3
GTX JOHN VIP Member Join Date: Jun 2009 Location: Boulder City, Nevada 89005 Posts: 2,528 Likes: 2,222 Liked 1,792 Times in 571 Posts	Re: 904 Pro Trans help I can not get a torque wrench in my Duster when the trans is in..........I go finger tight and back 1 1/2 Turns with a 5.0 ratio band lever or 2 turns with a stock lever.