|
01-23-2007, 09:39 PM | #1 |
Junior Member
Join Date: Jan 2007
Location: Gaffney S.C.
Posts: 3
Likes: 0
Liked 0 Times in 0 Posts
|
406 FOR SALE
This is a complete motor, still in the car, and you can see it run.
It is being sold complete from intake to oil pan and from flexplate to pulleys. Specs: 400 sbc bored .030 511 casting 2 bolt block stock crank stock rods with arp rod bolts TRW L2352 forged pistons 10:1 compression--pump gas Comp Cams 292H hydraulic cam 244/244 501 lift lobe seperation 110 2500-6500 rpm range (Used all comp cams cam kit) GM 041x heads--bowl blended with arp head bolts edelbrock rpm intake Holley 130 mechanical fuel pump As stated above, it is from intake to oil pan. Includes flexplate, balancer, and waterpump. Includes March underdrive pulleys. All you will need to add is a carb and a distributor. It even includes a set of dynomax headers for a 70-81 camaro. It includes an extra stock crank, set of stock rods, and two sets of gm 882 heads. One set of the 882 heads is bowl blended with 2.02/1.60 stainless valves. $1650 for all It will stay in the car and be running for everyone who may be interested to see. You can PM me or email me at tnt.racing@charter.net fast81@charter.net cell #864-303-5646 We are located in Gaffney, SC. -------------------------------------------------------------------------------- |
01-30-2007, 09:03 PM | #2 |
Junior Member
Join Date: Jan 2007
Location: Gaffney S.C.
Posts: 3
Likes: 0
Liked 0 Times in 0 Posts
|
ttt
|
|
|