throwout bearing problem

fabe427 · 03-16-2010, 08:51 PM

Have a question about what throwout bearing to use, Vehicle has a chevy clutch fork, 18 spline input shaft Jerico 4-speed with a McLeod long style pressure plate.(soft lock). Local part store cant come up with a replacement. Does anyone have a part number or know whats best to use?
Thanks in advance-Ed.

Ed Fabian
NHRA S/S 3045
64 Ford Mustang SS/L

james schaechter · 03-16-2010, 11:15 PM

I use a HAYS 70104. McLeod, Hays, Ram all have some good ones. I don't knw how this crosses to a Factory replacement #.

Ed Carpenter · 03-17-2010, 03:28 AM

I use the adjustable one from McLeod. I'll look for the number tommorow when i get out to the shop. Ed

Mike Taylor 3601 · 03-17-2010, 06:28 AM

I can't remember exactly without looking at them but I think it's around 65 chevy truck w/GMC V-6 maybe 1ton or maybe 50 series truck they had long style press plate you could probaly get at the parts house in town that has old stock and parts guys that know parts. You know the guys that can get you a quart of oil without knowing if it's 2 or 4 door
has AC or not What color it is.
Hays,Ram,Mc Leod etc. can fix you up.
Mike Taylor 3601

Stick Racing · 03-17-2010, 07:21 AM

All the McLeod PP's I've seen in a Chevy application uses the McLeod adjustable t/o bearing # 16505 with no spacers.

If you use another brand, don't forget to use a t/o bearing that measures 3 inches across the face for the long style PP.

__________________________

Andy Stone 1102 A/S 1112 SS/C

Ed Carpenter · 03-17-2010, 03:08 PM

Andy that's the one I use.

Joe Martens · 03-17-2010, 11:12 PM

Ed, I use a Federal Mogul 614018 that I got from a NAPA store. Hope this helps!

03-16-2010, 08:51 PM	#1
fabe427 Junior Member Join Date: Aug 2008 Posts: 32 Likes: 16 Liked 9 Times in 6 Posts	throwout bearing problem Have a question about what throwout bearing to use, Vehicle has a chevy clutch fork, 18 spline input shaft Jerico 4-speed with a McLeod long style pressure plate.(soft lock). Local part store cant come up with a replacement. Does anyone have a part number or know whats best to use? Thanks in advance-Ed. Ed Fabian NHRA S/S 3045 64 Ford Mustang SS/L

03-16-2010, 11:15 PM	#2
james schaechter VIP Member Join Date: Dec 2004 Location: Cumming GA Posts: 1,928 Likes: 1,071 Liked 1,212 Times in 249 Posts	Re: throwout bearing problem I use a HAYS 70104. McLeod, Hays, Ram all have some good ones. I don't knw how this crosses to a Factory replacement #. __________________ James Schaechter 3163 STK

03-17-2010, 03:28 AM	#3
Ed Carpenter Live Reporter Join Date: May 2006 Location: Dripping Springs, Tx Posts: 2,698 Likes: 185 Liked 503 Times in 126 Posts	Re: throwout bearing problem I use the adjustable one from McLeod. I'll look for the number tommorow when i get out to the shop. Ed __________________ Ed Carpenter 2005 Chevy Cobalt A/SM Race Engine Development

03-17-2010, 06:28 AM	#4
Mike Taylor 3601 VIP Member Join Date: Oct 2008 Location: Somerset,Ky Posts: 1,303 Likes: 198 Liked 116 Times in 48 Posts	Re: throwout bearing problem I can't remember exactly without looking at them but I think it's around 65 chevy truck w/GMC V-6 maybe 1ton or maybe 50 series truck they had long style press plate you could probaly get at the parts house in town that has old stock and parts guys that know parts. You know the guys that can get you a quart of oil without knowing if it's 2 or 4 door has AC or not What color it is. Hays,Ram,Mc Leod etc. can fix you up. Mike Taylor 3601

03-17-2010, 07:21 AM	#5
Stick Racing Member Join Date: Mar 2007 Posts: 169 Likes: 4 Liked 0 Times in 0 Posts	Re: throwout bearing problem All the McLeod PP's I've seen in a Chevy application uses the McLeod adjustable t/o bearing # 16505 with no spacers. If you use another brand, don't forget to use a t/o bearing that measures 3 inches across the face for the long style PP. __________________________ Andy Stone 1102 A/S 1112 SS/C

03-17-2010, 03:08 PM	#6
Ed Carpenter Live Reporter Join Date: May 2006 Location: Dripping Springs, Tx Posts: 2,698 Likes: 185 Liked 503 Times in 126 Posts	Re: throwout bearing problem Andy that's the one I use. __________________ Ed Carpenter 2005 Chevy Cobalt A/SM Race Engine Development

03-17-2010, 11:12 PM	#7
Joe Martens Senior Member Join Date: Dec 2001 Location: North Olmsted, Ohio Posts: 772 Likes: 556 Liked 181 Times in 62 Posts	Re: throwout bearing problem Ed, I use a Federal Mogul 614018 that I got from a NAPA store. Hope this helps! __________________ Joe Martens A/Stock 3969