|
|
12-04-2017, 04:07 PM | #1 |
VIP Member
Join Date: Aug 2013
Posts: 1,766
Likes: 1,197
Liked 1,957 Times in 492 Posts
|
Spindle question.
I have light brakes on a heavy spindle (76 nova) is there a drum spindle I can use with these brakes that will shed some weight?
__________________
Todd Greene |
12-04-2017, 04:19 PM | #2 |
Member
Join Date: Jul 2007
Posts: 137
Likes: 0
Liked 5 Times in 4 Posts
|
Re: Spindle question.
NHRA only allowed aftermarket brakes for safety purposes! Your Nova only came with factory front disc brakes and you are only allowed to use the stock spindles to be legal!
|
12-04-2017, 05:04 PM | #3 |
VIP Member
Join Date: Aug 2013
Posts: 1,766
Likes: 1,197
Liked 1,957 Times in 492 Posts
|
Re: Spindle question.
Thank you!
__________________
Todd Greene |
12-04-2017, 09:24 PM | #4 |
VIP Member
Join Date: Feb 2014
Location: Lakewood Washington
Posts: 1,407
Likes: 29
Liked 236 Times in 127 Posts
|
Re: Spindle question.
The NHRA allowed part is a bit deceiving. This is what the 2017 book says for Stock:
BRAKES Must be equipped with stock production four-wheel hydraulic brake system, or aftermarket disc brakes meeting the following criteria: 1. Minimum effective piston area per wheel: 3 1/2 square inches. 2. Minimum disc (rotor) diameter 10 1/4 inches x 5/16-inch thick. 3. Must install dual master cylinder with any modified brake system, splitting front and rear into separate systems. 4. Dual calipers on rear wheels permitted, maximum one hydraulic brake line to dual rear brake system (no wires). 5. Rear wheel line-loc prohibited; front wheel line-loc permitted. Parking brake optional. 6. Carbon-fiber brake rotors prohibited. See General Regulations 3:1. As far as spindles go. Stock.
__________________
Dale Shearon 68 Mustang 6394 |
12-04-2017, 09:41 PM | #5 |
Senior Member
Join Date: Feb 2002
Location: Southeast Michigan
Posts: 885
Likes: 63
Liked 221 Times in 102 Posts
|
Re: Spindle question.
Couldn't you buy a brake package that included the spindles ? Those spindles might not have that extra metal on them . I know of some aftermarket brakes need the spindles sent in for them to be modified .
|
12-04-2017, 11:06 PM | #6 |
VIP Member
Join Date: Aug 2013
Posts: 1,766
Likes: 1,197
Liked 1,957 Times in 492 Posts
|
Re: Spindle question.
Hmmm.
__________________
Todd Greene |
|
|