|
05-16-2012, 08:42 PM | #1 |
Junior Member
Join Date: Apr 2012
Posts: 14
Likes: 0
Liked 0 Times in 0 Posts
|
gauge of wire for Alternator to battery?
What gauge wire would you guys use for a 1 wire 140 amp alternator lead to the battery positive side mounted at the rear of the car?
Is #10 gauge alright? |
05-16-2012, 09:15 PM | #2 |
Member
Join Date: Aug 2010
Location: CT
Posts: 393
Likes: 1,278
Liked 260 Times in 112 Posts
|
Re: gauge of wire for Alternator to battery?
I believe that #10 wire will only carry 30 amps, can't imagine 140 going thru that small of a wire - maybe a #6 is enough? I would think that should be a lot closer.
__________________
Phil Molski PMR Performance S/C 1623 |
05-16-2012, 09:42 PM | #3 |
VIP Member
Join Date: May 2006
Location: Murfreesboro TN
Posts: 4,934
Likes: 1,006
Liked 1,092 Times in 286 Posts
|
Re: gauge of wire for Alternator to battery?
Six or eight gauge, minimum.
__________________
Alan Roehrich 212A G/S |
05-16-2012, 10:18 PM | #4 |
VIP Member
Join Date: Jan 2005
Location: Where the Green Grass Grows, AL
Posts: 2,375
Likes: 0
Liked 3 Times in 3 Posts
|
Re: gauge of wire for Alternator to battery?
I've got a #6 but my battery is in the front
__________________
Chad Rhodes 2113 I/SA |
05-17-2012, 01:04 PM | #5 |
Senior Member
Join Date: Sep 2007
Posts: 574
Likes: 6
Liked 44 Times in 22 Posts
|
Re: gauge of wire for Alternator to battery?
20' long wire for 140 amps would be 0 gauge. See the table in this thread on yellowbullet:
http://www.yellowbullet.com/forum/sh...ad.php?t=47266 |
05-17-2012, 02:32 PM | #6 |
Junior Member
Join Date: Apr 2012
Posts: 14
Likes: 0
Liked 0 Times in 0 Posts
|
Re: gauge of wire for Alternator to battery?
Okay, so 6 or 8 gauge it is. I was lead to believe that 10 gauge was enough for the field stud from the alternator to the battery. Yes, the battery is in the trunk.
What type of wire is good? crosslink? solid strand? |
05-17-2012, 02:49 PM | #7 |
Senior Member
Join Date: Dec 2006
Posts: 589
Likes: 0
Liked 0 Times in 0 Posts
|
Re: gauge of wire for Alternator to battery?
Use copper stranded that is designed for automotive use. It's more flexible then equipment wire.
|
05-17-2012, 08:37 PM | #8 |
VIP Member
Join Date: Jan 2003
Location: Allentown,PA
Posts: 2,438
Likes: 785
Liked 703 Times in 206 Posts
|
Re: gauge of wire for Alternator to battery?
Be sure to use a fusible link or a maxi fuse on each end when using heavy gauge wire for the alternator. , you dont want to burn the car down if the wire gets pinched !
__________________
Tom Goldman 1500 SG , 1506 STK |
05-17-2012, 09:03 PM | #9 |
Junior Member
Join Date: Aug 2008
Location: columbia TN
Posts: 88
Likes: 0
Liked 0 Times in 0 Posts
|
Re: gauge of wire for Alternator to battery?
I did a little research on this last year and ended up using 6 AWG fine stranded tinned marine battery cable boat wire on my 90 amp alternater, bought on ebay for 1.25 a foot.
|
05-17-2012, 10:41 PM | #10 |
Junior Member
Join Date: Apr 2012
Posts: 14
Likes: 0
Liked 0 Times in 0 Posts
|
Re: gauge of wire for Alternator to battery?
Funny thing is that I have been using #10 gauge on this connection for some time now with no problems, but I guess I got lucky with that one.
Could the car have not been getting full amperage to the electric fuel pump and electric cooling fan under full load? I'm going for #4 or #6 to make sure it's right. |
|
|