soft lok clutch rpm

grant6395 · 10-29-2016, 02:32 AM

has anyone spun one of these units 9800 rpm before?
or is it a disaster waiting to happen.i called them ,but really wasnt convinced,even though they said"shouldnt be an issue"...thanks grant

SSDiv6 · 10-29-2016, 11:11 PM

Quote:

Originally Posted by grant6395

has anyone spun one of these units 9800 rpm before?
or is it a disaster waiting to happen.i called them ,but really wasnt convinced,even though they said"shouldnt be an issue"...thanks grant

Grant,

Yes, they can be spun that high or even higher if you have the right clutch assembly.
Although you don't mention the brand, I would suggest you talk to Rob at Advance Clutches or the guys at Ram Clutches.

randy wilson · 10-30-2016, 09:07 AM

Quote:

Originally Posted by grant6395

has anyone spun one of these units 9800 rpm before?
or is it a disaster waiting to happen.i called them ,but really wasnt convinced,even though they said"shouldnt be an issue"...thanks grant

Yes. 10,500 consistently in an SS/DM. We tried other "trick" clutches, but ran our best with a single disc soft loc.

Jim Caughlin · 10-31-2016, 10:59 AM

I used to leave at over 10,000 and crossed the finishline at 9400 with a McLeod 10.5" unit and an alum flywheel. I don't use a Mcleod anymore but didn't have any issues from an RPM standpoint when I did. I would highly recommend something smaller diameter and dual disc from a performance standpoint if you are starting from scratch.

Jim Caughlin
SS 6019

grant6395 · 11-02-2016, 08:18 PM

thank you for the reply guys.i am putting my 400 ci comp engine in my fairlane for fun this winter.i could use my liberty and dual 7 east west deal,but wanted to keep it simple and run what was in there.a 5 spd lenco and a soft lok clutch(mcleod).just wasnt sure about the rpm,simply because the current engine only turns 8200,not 10,000 plus.grant.

10-29-2016, 02:32 AM	#1
grant6395 Junior Member Join Date: Nov 2012 Posts: 10 Likes: 0 Liked 0 Times in 0 Posts	soft lok clutch rpm has anyone spun one of these units 9800 rpm before? or is it a disaster waiting to happen.i called them ,but really wasnt convinced,even though they said"shouldnt be an issue"...thanks grant

10-31-2016, 10:59 AM	#4
Jim Caughlin Senior Member Join Date: Mar 2002 Location: Woodburn, Or Posts: 635 Likes: 70 Liked 693 Times in 208 Posts	Re: soft lok clutch rpm I used to leave at over 10,000 and crossed the finishline at 9400 with a McLeod 10.5" unit and an alum flywheel. I don't use a Mcleod anymore but didn't have any issues from an RPM standpoint when I did. I would highly recommend something smaller diameter and dual disc from a performance standpoint if you are starting from scratch. Jim Caughlin SS 6019

11-02-2016, 08:18 PM	#5
grant6395 Junior Member Join Date: Nov 2012 Posts: 10 Likes: 0 Liked 0 Times in 0 Posts	Re: soft lok clutch rpm thank you for the reply guys.i am putting my 400 ci comp engine in my fairlane for fun this winter.i could use my liberty and dual 7 east west deal,but wanted to keep it simple and run what was in there.a 5 spd lenco and a soft lok clutch(mcleod).just wasnt sure about the rpm,simply because the current engine only turns 8200,not 10,000 plus.grant.