|
07-18-2016, 02:06 PM | #1 |
Member
Join Date: Apr 2007
Posts: 193
Likes: 7
Liked 9 Times in 4 Posts
|
Chassis Dyno : Anyone have any experience with one
Here at work we are looking at possibly buying a chassis dyno and I was curious if anyone on here had any real world experience with one and had any insight on them and maybe some input on one brand over another. Thanks a bunch.
|
07-18-2016, 03:52 PM | #2 |
Member
Join Date: Oct 2002
Location: kansas
Posts: 229
Likes: 413
Liked 223 Times in 43 Posts
|
Re: Chassis Dyno : Anyone have any experience with one
I went back to school for a semester or two after I retired at Pitt State. I believe their chasis dyno was a Mustang. It worked very well on street cars and pickups and was very consistent. The electronic traction control had to be unhooked or you were in for a terrible ride. With a spool you had to be sure the tires were almost exactly the same size or you ate up a lot of tire. I don't think we had anything above 475 hp on it. We tried a 700 ftlb (?) hopped up dodge diesel and drove through what the dyno would handle. As I remember it used electric motor/generators as a brake.
There was a gentleman who showed up with a inertia motorcycle dyno that was deadly consistent. I would love to own the automotive version. Pete |
07-18-2016, 04:54 PM | #3 |
Senior Member
Join Date: Mar 2006
Posts: 957
Likes: 604
Liked 160 Times in 56 Posts
|
Re: Chassis Dyno : Anyone have any experience with one
An inertia chassis dyno is the one to have or use. I had my car on one last week and the owner stated it will place a load on the engine like it is going down the track. It was a Mustang brand dyno. This place tunes diesel trucks and twin turbo cars with this one. So it must be able to handle high HP and TQ.
Not sure that it means much, but the operator had an app on his phone so he could change settings without having to get out of the car. It was paired to the laptop for the dyno. They also had additional rollers that were not in place, possibly for an all wheel drive car. I will be going back in a couple of weeks, if I can get any additional information for you let me know. Sean
__________________
Sean Marconette 84 Mustang 5060 SS/N |
07-18-2016, 05:16 PM | #4 |
Veteran Member
Join Date: Mar 2005
Location: Sand Springs, OK
Posts: 8,132
Likes: 896
Liked 389 Times in 168 Posts
|
Re: Chassis Dyno : Anyone have any experience with one
I had a very busy Dyno Jet (Inertia) chassis dyno for about ten years.
Good for a lot of things. Not the last word, the race track is. Repeats better with a stick car. ATF temps effect converter slippage a lot more than I would have thought.
__________________
Ed Wright 4156 SS/JA |
07-18-2016, 07:35 PM | #5 |
Live Reporter
Join Date: May 2006
Location: Dripping Springs, Tx
Posts: 2,697
Likes: 185
Liked 502 Times in 125 Posts
|
Re: Chassis Dyno : Anyone have any experience with one
The one at my sons shop is real accurate. Within a .05-06 of on track et. My car will be on there soon. I'll let you know how it goes.
__________________
Ed Carpenter 2005 Chevy Cobalt A/SM Race Engine Development |
Thread Tools | |
Display Modes | |
|
|