HOME FORUM RULES CONTACT
     
   
   

Go Back   CLASS RACER FORUM > Class Racer Forums > Stock and Super Stock Tech


Reply
 
Thread Tools Display Modes
Old 02-22-2018, 04:52 PM   #31
Bobby Lundholm
Member
 
Join Date: Dec 2006
Location: Charlevoix, MI
Posts: 421
Likes: 94
Liked 83 Times in 33 Posts
Default Re: Thoughts on accepted aftermarket heads for 350?

Quote:
Originally Posted by 5389stk View Post
Stock runner must be same size as head it is replacing. According to stock head cc guide sub notes on replacement heads
That's what the question is on how to get there without it being illegal.
__________________
Bobby Lundholm 3516 G/SA
Bobby Lundholm is offline   Reply With Quote
Old 02-22-2018, 04:58 PM   #32
terry1
Member
 
Join Date: Sep 2006
Location: Moncton, N.B.
Posts: 276
Likes: 24
Liked 24 Times in 13 Posts
Smile Re: Thoughts on accepted aftermarket heads for 350?

I figured that that would be the case.
So, if I have a set of aluminum heads that are 168 CC's on the intake;
that says that NHAR does not care how it is done as long as it is
"stock in appearance"!
That says to me that NHRA are saying "go at it boys" and see how good
you are!
Terry K
terry1 is offline   Reply With Quote
Old 02-22-2018, 05:10 PM   #33
Bobby Lundholm
Member
 
Join Date: Dec 2006
Location: Charlevoix, MI
Posts: 421
Likes: 94
Liked 83 Times in 33 Posts
Default Re: Thoughts on accepted aftermarket heads for 350?

Quote:
Originally Posted by terry1 View Post
I figured that that would be the case.
So, if I have a set of aluminum heads that are 168 CC's on the intake;
that says that NHAR does not care how it is done as long as it is
"stock in appearance"!
That says to me that NHRA are saying "go at it boys" and see how good
you are!
Terry K
Right or run it as it is with the 185cc runners. Either way it's technically illegal.
__________________
Bobby Lundholm 3516 G/SA
Bobby Lundholm is offline   Reply With Quote
Old 02-22-2018, 05:25 PM   #34
Mark Faul
Member
 
Join Date: Jan 2002
Location: Tacoma,WA
Posts: 341
Likes: 2
Liked 43 Times in 9 Posts
Default Re: Thoughts on accepted aftermarket heads for 350?

Quote:
Originally Posted by Chris Hardy View Post
Wouldn't it be easier for everyone, if NHRA just calls it: Every SBC head must be Less than or equal to 185CC's, have stock diameter valves? Then they just inspect for grinding and pour? We all make a ton of power, and inspection is easy. (FYI, the pinch cross section on the Dart 185cc heads are smaller than the stock intake manifold cross section) Thus, the heads will be a substantial gain once a good valve job and flowing is completed.
They already have a class where they pour the heads and have stock valve diameter. It's called Super Stock.
Sure glad I decided to quit running Stock. Getting more screwed up every year...
Mark Faul is offline   Reply With Quote
Old 02-22-2018, 06:25 PM   #35
Dan Fahey
VIP Member
 
Dan Fahey's Avatar
 
Join Date: Oct 2008
Posts: 2,115
Likes: 1,073
Liked 178 Times in 110 Posts
Default Re: Thoughts on accepted aftermarket heads for 350?

Quote:
Originally Posted by Mark Faul View Post
They already have a class where they pour the heads and have stock valve diameter. It's called Super Stock.
Sure glad I decided to quit running Stock. Getting more screwed up every year...

Holy Crate Motor Batman !!

We just had this conversation.

D
Dan Fahey is offline   Reply With Quote
Old 02-22-2018, 08:57 PM   #36
Barry Polley
Senior Member
 
Join Date: Dec 2003
Location: Vacaville Ca
Posts: 733
Likes: 624
Liked 538 Times in 222 Posts
Default Re: Thoughts on accepted aftermarket heads for 350?

Quote:
Originally Posted by Mark Faul View Post
They already have a class where they pour the heads and have stock valve diameter. It's called Super Stock.
Sure glad I decided to quit running Stock. Getting more screwed up every year...

My partner Jeff said; its like comp 25 years ago!
__________________
Barry Polley 758 A/SA
California- No place to race!
Barry Polley is offline   Reply With Quote
Old 02-23-2018, 07:31 AM   #37
FLEMING
Member
 
Join Date: Aug 2003
Posts: 238
Likes: 19
Liked 21 Times in 11 Posts
Default Re: Thoughts on accepted aftermarket heads for 350?

Quote:
Originally Posted by Greg Hill View Post
The Edlebrock heads are 185 cc’s on the intake runner. Who approves this stuff?

I saw that! I think i will just look for some 993 I just want to fix a legal motor lol
FLEMING is offline   Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:48 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.