|
03-15-2016, 07:22 PM | #1 |
Junior Member
Join Date: Nov 2007
Location: Boise
Posts: 49
Likes: 0
Liked 0 Times in 0 Posts
|
c4 build
Hi everyone, long time no post.
I'm building 1973 Ford c4 transmission for friend. It'll be going behind a hot little 347. Owner is anticipating 500 ft. lbs. of torque. I would appreciate any suggestions to improve the build. Here's what I have so far: TCI input 24/26 C type servo Alto reds and steels Kevlar band 5 pinion front planetary Shift kit hasn't been purchased yet but a B&M or Fairbanks id being considered. Are there any other improvements I should make and will these parts hold in a c4? Thank you |
03-15-2016, 07:46 PM | #2 |
Member
Join Date: Mar 2011
Posts: 186
Likes: 0
Liked 28 Times in 15 Posts
|
Re: c4 build
Sugest you talk to joel - Joels on Joy - He built all the C4's for the CJ Mustangs
|
03-15-2016, 11:42 PM | #3 |
Junior Member
Join Date: Nov 2013
Posts: 91
Likes: 0
Liked 0 Times in 0 Posts
|
Re: c4 build
The parts you have listed are a good start. The key to a high torque high RPM C-4 is replacing the thrust washers with Torrington thrust bearings. Once that is under control you may consider a manual shift fixed line pressure valvebody. The traditional shift kit with vacuum modulator line control and governor can be marginal with that much engine power. The Ford C-4 is an excellent transmission, It is light weight, fits well and has reasonable durability.
|
03-16-2016, 06:26 PM | #4 |
Junior Member
Join Date: Nov 2007
Location: Boise
Posts: 49
Likes: 0
Liked 0 Times in 0 Posts
|
Re: c4 build
I appreciate the responses.
|
04-12-2016, 04:29 PM | #5 |
Junior Member
Join Date: Sep 2011
Location: Houston, Texas
Posts: 21
Likes: 0
Liked 0 Times in 0 Posts
|
Re: c4 build
|
|
|