Vega wheels

John Kelley · 03-31-2009, 10:46 PM

I need some 14 inch steel wheels to fit a stock Vega 4 lug bolt pattern.
What wheels should I look for ????? I think it's 4 lug on a 4 inch circle.....
This is just a temporary fix so I can roll it around as I've got a good set of 14 inch tires just setting......THANKS......jlk

Lyn Smith · 04-01-2009, 05:01 PM

I pretty sure wheels off of a early Nova 62-63 ,and corvair might work.A early mustang might work also.

Dennis P Chapman · 04-01-2009, 06:20 PM

Wheels from monza or from olds starfire will work.

Dwight Southerland · 04-01-2009, 06:46 PM

He's asking for 14" wheels. All the examples mentioned are 13".

Dennis P Chapman · 04-01-2009, 07:00 PM

Dwight is right sorry.

Tom keedle · 04-01-2009, 07:34 PM

look at some of the older RWD corrollas.
the center hole is too small but if it's just for rollers....hog it out!
OR look for some aftermarket wheels in a 14", the center holes are already too big

TRY ONE FIRST , i'm NOT sure that vega and early nova are the same bolt circle...

John Kelley · 04-02-2009, 06:26 PM

I'm at wit's end looking for wheeels !! So I';m just going to look for some usable used 13" tires
I live in Tightwad, TEXAS and I'm CHEAP.......:-)

03-31-2009, 10:46 PM	#1
John Kelley Senior Member Join Date: Feb 2002 Location: Tightwad,TEXAS Posts: 911 Likes: 6 Liked 3 Times in 3 Posts	Vega wheels I need some 14 inch steel wheels to fit a stock Vega 4 lug bolt pattern. What wheels should I look for ????? I think it's 4 lug on a 4 inch circle..... This is just a temporary fix so I can roll it around as I've got a good set of 14 inch tires just setting......THANKS......jlk

04-01-2009, 05:01 PM	#2
Lyn Smith VIP Member Join Date: Dec 2001 Location: Pontiac,il. Posts: 1,121 Likes: 217 Liked 841 Times in 156 Posts	Re: Vega wheels I pretty sure wheels off of a early Nova 62-63 ,and corvair might work.A early mustang might work also.

04-01-2009, 06:20 PM	#3
Dennis P Chapman VIP Member Join Date: Jun 2007 Location: Toms River NJ Posts: 1,594 Likes: 401 Liked 52 Times in 24 Posts	Re: Vega wheels Wheels from monza or from olds starfire will work. __________________ Dennis P Chapman 1904 STK NHRA National Record Holder Car Owner.

04-01-2009, 06:46 PM	#4
Dwight Southerland VIP Member Join Date: Dec 2001 Location: Arkansas - In the middle of everything. Posts: 1,980 Likes: 53 Liked 724 Times in 177 Posts	Re: Vega wheels He's asking for 14" wheels. All the examples mentioned are 13".

04-01-2009, 07:00 PM	#5
Dennis P Chapman VIP Member Join Date: Jun 2007 Location: Toms River NJ Posts: 1,594 Likes: 401 Liked 52 Times in 24 Posts	Re: Vega wheels Dwight is right sorry. __________________ Dennis P Chapman 1904 STK NHRA National Record Holder Car Owner.

04-01-2009, 07:34 PM	#6
Tom keedle Senior Member Join Date: Dec 2008 Location: Berthoud, Coloraduh Posts: 695 Likes: 13 Liked 7 Times in 6 Posts	Re: Vega wheels look at some of the older RWD corrollas. the center hole is too small but if it's just for rollers....hog it out! OR look for some aftermarket wheels in a 14", the center holes are already too big TRY ONE FIRST , i'm NOT sure that vega and early nova are the same bolt circle...

04-02-2009, 06:26 PM	#7
John Kelley Senior Member Join Date: Feb 2002 Location: Tightwad,TEXAS Posts: 911 Likes: 6 Liked 3 Times in 3 Posts	Re: Vega wheels I'm at wit's end looking for wheeels !! So I';m just going to look for some usable used 13" tires I live in Tightwad, TEXAS and I'm CHEAP.......:-)