|
05-20-2019, 08:00 PM | #11 |
VIP Member
Join Date: Jun 2007
Location: Northern New Jersey suburbs
Posts: 2,273
Likes: 25
Liked 510 Times in 200 Posts
|
Re: Oil bypass, do you block it?
We buy a very large number of Wix filters every year and nothing looks any different to me quality wise.
Oil, air, fuel and coolant filters. We have a very large dedicated filter room and stock hundreds. From small machines to very large, they all get routine service and we use primarily Wix and NAPA if we need something we don’t have. Wix makes NAPA’s filters
__________________
Rich Biebel S/C 1479 |
05-21-2019, 01:38 AM | #12 |
Member
Join Date: May 2009
Posts: 225
Likes: 165
Liked 109 Times in 48 Posts
|
Re: Oil bypass, do you block it?
|
05-21-2019, 07:38 AM | #13 | |
Member
Join Date: Feb 2007
Location: NORTHEAST
Posts: 287
Likes: 1
Liked 18 Times in 10 Posts
|
Re: Oil bypass, do you block it?
Quote:
Why would anyone want any trash to circulate through there engine??? What a joke I have been doing this for 45 years as well and no problems but you have to know what your doing when block a bypass. |
|
05-21-2019, 07:55 AM | #14 |
Member
Join Date: Dec 2001
Location: Ontario Canada
Posts: 358
Likes: 99
Liked 6 Times in 4 Posts
|
Re: Oil bypass, do you block it?
I went to Napa for a 1061 but all they had was a 1060. are they both the same ?
|
05-21-2019, 08:38 AM | #15 |
Senior Member
Join Date: Jun 2002
Posts: 906
Likes: 85
Liked 82 Times in 44 Posts
|
Re: Oil bypass, do you block it?
|
05-21-2019, 09:01 AM | #16 |
VIP Member
Join Date: Jun 2007
Location: Northern New Jersey suburbs
Posts: 2,273
Likes: 25
Liked 510 Times in 200 Posts
|
Re: Oil bypass, do you block it?
51060 has an anti drain back valve and 51061 does not.
Same filter other than that. 51060 is used for horizontal type mounting.... 51061 is for vertical type mounting.... That "valve" is really just a red silicone rubber flap... You can look at the top and see it covering the holes on any Wix filter that has the anti drain back feature... Lots of machines mount the filter off the side......and many vehicles. Without the valve you'll hear a nasty rattle everytime you start your engine for a couple seconds...or a valve that's not working... I had a 454 pickup that was 4 wheel drive and some various brand filters did not do a good job of retaining oil …and if I heard the rattle I'd replace that filter..... Wix never had that issue...
__________________
Rich Biebel S/C 1479 Last edited by Rich Biebel; 05-21-2019 at 09:10 AM. |
05-21-2019, 11:08 AM | #17 |
Senior Member
Join Date: Nov 2015
Location: Inver Grove Heights, MN
Posts: 898
Likes: 604
Liked 432 Times in 225 Posts
|
Re: Oil bypass, do you block it?
What Rich said about the anti-drainback valve is correct. I've used both part numbers interchangeably on my BBC race engines forever.
__________________
S/ST 51 S/C 53 |
05-21-2019, 11:59 AM | #18 |
Member
Join Date: Dec 2001
Location: Ontario Canada
Posts: 358
Likes: 99
Liked 6 Times in 4 Posts
|
Re: Oil bypass, do you block it?
Thanks for the info
|
05-21-2019, 12:10 PM | #19 |
Senior Member
Join Date: Jun 2002
Posts: 906
Likes: 85
Liked 82 Times in 44 Posts
|
Re: Oil bypass, do you block it?
Interesting Rich, is it listed in the spec somewhere and I missed it? Had a few stores try to sell me filters w/o the anti drain back for my Buick, always passed figuring it would enhance the mess when I changed it.
|
05-21-2019, 03:06 PM | #20 |
VIP Member
Join Date: Jun 2007
Location: Northern New Jersey suburbs
Posts: 2,273
Likes: 25
Liked 510 Times in 200 Posts
|
Re: Oil bypass, do you block it?
If you look in a Wix filter book it lists everything as far as specs but doesn't say anything about how a filter is mounted
Numerous engines mount the filter other then straight up and down...….and everytime you start it oil pressure takes longer to build up as it fills the filter that drained back. Never gave it much thought myself until I read the catalog..... Physical size, thread size, with or without the anti drain back feature....probably more info but I don't have a catalog handy... I did go look at a 51060 and a 51061 just to be sure I had the info correct... Those are std length filters.... They also make a shorter length and a 2 quart "truck" filter..... Some are labeled Extended Life.... I use the 51061 R on my engines and have for years.....Bought them by the case... We buy from Filter One.....Nobody comes close to their prices and they ship UPS... Only issue is they do a very poor job boxing filters for shipment.....Some get damaged or boxes busted up.....occasionally....
__________________
Rich Biebel S/C 1479 Last edited by Rich Biebel; 05-21-2019 at 03:09 PM. |
Thread Tools | |
Display Modes | |
|
|