Virgin Mopar 340 Engine / Xtra Untouched X Heads

GTX JOHN · 01-22-2021, 03:34 PM

Nice Standard Block
Steel Crank early engine
X Heads
Pretty Complete
Choice of Aluminum Intake/Stock
Carter AVS Carb
Headers
In my shop 40+ years in dry Storage
$2,450. OR $1,850 with J / 587 / Any Other Heads

Also Two Virgin pairs of X Heads Complete
Never touched or run on Unleaded gas
Nice original ones I (Going to Alum.)
$750. pr.

I just tripped over two more pair of Heads
Hot Tanked Maged Pressure checked by Precision Cylinder Heads years ago
1 pr. 894
1 pr 051

Your choice $750. pr
.030 Bare Block out of my Demon (Alway 1.+ under when I need it)
Done by legendary Steve Wann
Thickest Best Stock 340 block I have ever seen.
Filled/Decked/Maged and everything else legal.
I nicked bottom of Cylinder wall trying to smooth Water Flow.
Probably safest to put in a sleeve
than take a chance with it.
$950.

A 1/2 Dozen Virgin 340 Blocks
Mostly Standard and sitting Dry for 40 years!
Your Choice
$1,150.

Also Bare 400 Block just out of my Boys 73 Roadrunner
It was built by Steve Wann and ran 1.20 + under
light partial Fill and all machine work done Runner up Az. Natls. 2020
.050 over and nice but it probably needs a sleeve as well
$750.

Changing Directions to Race Blocks or Aftermarket Stuff.

10,000 Square Ft.(No Misprint) of Everything Mopar
Tons of Race Stuff!!!
Let me know you needs

Getting close to Time to hang up my Helmet on the Fireplace.

PM me OR Racer7411@yahoo.com [/email]

01-22-2021, 03:34 PM	#1
GTX JOHN VIP Member Join Date: Jun 2009 Location: Boulder City, Nevada 89005 Posts: 2,530 Likes: 2,222 Liked 1,808 Times in 572 Posts	Virgin Mopar 340 Engine / Xtra Untouched X Heads Nice Standard Block Steel Crank early engine X Heads Pretty Complete Choice of Aluminum Intake/Stock Carter AVS Carb Headers In my shop 40+ years in dry Storage $2,450. OR $1,850 with J / 587 / Any Other Heads Also Two Virgin pairs of X Heads Complete Never touched or run on Unleaded gas Nice original ones I (Going to Alum.) $750. pr. I just tripped over two more pair of Heads Hot Tanked Maged Pressure checked by Precision Cylinder Heads years ago 1 pr. 894 1 pr 051 Your choice $750. pr .030 Bare Block out of my Demon (Alway 1.+ under when I need it) Done by legendary Steve Wann Thickest Best Stock 340 block I have ever seen. Filled/Decked/Maged and everything else legal. I nicked bottom of Cylinder wall trying to smooth Water Flow. Probably safest to put in a sleeve than take a chance with it. $950. A 1/2 Dozen Virgin 340 Blocks Mostly Standard and sitting Dry for 40 years! Your Choice $1,150. Also Bare 400 Block just out of my Boys 73 Roadrunner It was built by Steve Wann and ran 1.20 + under light partial Fill and all machine work done Runner up Az. Natls. 2020 .050 over and nice but it probably needs a sleeve as well $750. Changing Directions to Race Blocks or Aftermarket Stuff. 10,000 Square Ft.(No Misprint) of Everything Mopar Tons of Race Stuff!!! Let me know you needs Getting close to Time to hang up my Helmet on the Fireplace. PM me OR Racer7411@yahoo.com [/email] __________________ John Irving 741 Stock 741 Super Stock Last edited by GTX JOHN; 02-05-2021 at 02:36 AM.