|
07-19-2019, 12:01 PM | #1 |
Junior Member
Join Date: Jul 2019
Posts: 18
Likes: 0
Liked 3 Times in 3 Posts
|
oilpan and camcore
I has a engine update on a Cuda 70 with street Hemi for AA/SA in Sweden.
2 things I need to clear up, as I hear dual messages on. I has bought the new Mopar Performance block and will change the oil pan. The oil pan in the list was OEM 6Q ( as I used before ) A CRF 7Q ( 2” deeper than OEM ) was ok to all BB Mopars but not the Hemi before. https://www.cfrperformance.com/CHRYS...cfr-7117-z.htm I did ask NHRA, so they has now approved it. But I did also ask NHRA on a Mopar oil pan as they say on the ‘field’ a 8Q race pan is legal, as it has a Mopar part number. Many seems to use them and speed shop I will use say they is ‘legal’, but NHRA tech told me, it’s not legal just as they has a Mopar part number Only a oil pan that are listed or OEM is legal. -So question is ; What to do here as it seems the MP 8Q race pan do pass tech on the field by NHRA. Next question. As a new block is ongoing at this moment, I can get it machined on the cam core I prefer, OEM or bigger. Again, if I read the rule book it is not allowed, and if I ask NHRA tech it is not allowed. But out on the field I heard this is consider ok as with babbit bearing it can be seen as a ‘service’, and it pass tech since many years. Can some help me celar this out ? P.S. I like to use listed parts and read the rule book, and I did actually get the older MP block listed ok from NHRA just some years ago. Last edited by HankN; 07-20-2019 at 04:52 PM. |
07-19-2019, 06:58 PM | #2 |
Senior Member
Join Date: Feb 2002
Location: Southeast Michigan
Posts: 885
Likes: 63
Liked 221 Times in 102 Posts
|
Re: oilpan and camcore
I would call a division Tech Director or the National Tech Director , and go with what they tell you is legal . Just because some racers get away with some of that shady stuff , doesn't mean they are legal .
|
Liked |
07-19-2019, 08:46 PM | #3 |
VIP Member
Join Date: Jun 2006
Posts: 3,349
Likes: 320
Liked 280 Times in 150 Posts
|
Re: oilpan and camcore
SS3011--- the guys in SWEDEN not the US who's he gonna call???
|
07-19-2019, 09:40 PM | #4 |
Member
Join Date: Sep 2009
Posts: 136
Likes: 78
Liked 70 Times in 39 Posts
|
Re: oilpan and camcore
They have this new-fangled thing called e-mail, that might work
Seriously though, let an NHRA representative answer the question for you. Then decide if what the racers tell you is the direction you choose. |
07-19-2019, 11:52 PM | #5 |
VIP Member
Join Date: Feb 2014
Location: Derby City, USA
Posts: 3,315
Likes: 855
Liked 6,585 Times in 1,280 Posts
|
Re: oilpan and camcore
What ever you do Hank, Do NOT e mail Pat Cevengros....trust me on this one....
|
07-20-2019, 07:50 AM | #6 |
Live Reporter
Join Date: Oct 2004
Location: Hickory, Ky
Posts: 10,270
Likes: 1,631
Liked 9,422 Times in 1,951 Posts
|
Re: oilpan and camcore
Dave, Harry, or Wesley
|
07-20-2019, 08:42 AM | #7 |
Junior Member
Join Date: Jul 2019
Posts: 18
Likes: 0
Liked 3 Times in 3 Posts
|
Re: oilpan and camcore
Ok, thanks.
How to contact them. Note, we run by NHRA rules here. The NHRA tech I mailed/talked to is Pat Cevengros by the way. What racer say or speed shop or engine builders says is secondary, so I must has on print what one can do or not to pass a NHRA in USA tech. I’ll just wonder how Mr Cevengros can has other sights than others from NHRA ? I’m not new into this as I been in stock since mid 80’s. I has read the book as the bible, then related to engine builders what was accepted, but it’s been more of rumours and then we had the part list and rotating list. But on this new update I will has in on print exactly what is ok 2019 or not, even as I’m aware of the complexity. But why should it be ‘complex’ at all as rule book is there and it is a accepted part list at the NHRA web site. Last edited by HankN; 07-20-2019 at 04:53 PM. |
07-20-2019, 02:15 PM | #8 |
VIP Member
Join Date: Feb 2014
Location: Derby City, USA
Posts: 3,315
Likes: 855
Liked 6,585 Times in 1,280 Posts
|
Re: oilpan and camcore
|
07-20-2019, 03:00 PM | #9 |
Junior Member
Join Date: Jul 2019
Posts: 18
Likes: 0
Liked 3 Times in 3 Posts
|
Re: oilpan and camcore
What role in NHRA has Cvengros ?
I don’t need to mail him again as I got clear message from him on this 2 issues I ask about what’s going on at the field. So let’s see what others at NHRA in tech can do here out on print. I need contact information, or if some other tech person read this ; you are more than welcome to help me out. Last edited by HankN; 07-20-2019 at 04:53 PM. |
07-20-2019, 03:21 PM | #10 |
Member
Join Date: Aug 2017
Posts: 155
Likes: 18
Liked 129 Times in 51 Posts
|
Re: oilpan and camcore
|
Thread Tools | |
Display Modes | |
|
|