1971 Buick 455 GS F/SA G/SA Build

HP HUNTER · 04-15-2017, 10:55 PM

I finally got the exhaust side of my heads done. Although I'am not sure I have this right, so I have questions. On my BBC builds with conventional camshafts I've always wanted lazy low lift flow then have it come on after .300 lift and take off, this has always worked well for me. On my Buick I gained around 12 CFM @ .200 and 12 CFM @ .300 and about 10 CFM @ .400 and finally 9 CFM @ .466 peak lift, will this help me or hurt me?

04-15-2017, 10:55 PM	#28
HP HUNTER Senior Member Join Date: Feb 2012 Location: Colorado Springs Colorado/Thousand Oaks Ca Posts: 606 Likes: 68 Liked 238 Times in 97 Posts	Re: 1971 Buick 455 GS F/SA G/SA Build I finally got the exhaust side of my heads done. Although I'am not sure I have this right, so I have questions. On my BBC builds with conventional camshafts I've always wanted lazy low lift flow then have it come on after .300 lift and take off, this has always worked well for me. On my Buick I gained around 12 CFM @ .200 and 12 CFM @ .300 and about 10 CFM @ .400 and finally 9 CFM @ .466 peak lift, will this help me or hurt me?

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode