|
09-06-2018, 09:55 PM | #1 |
Junior Member
Join Date: Aug 2008
Posts: 32
Likes: 16
Liked 9 Times in 6 Posts
|
Wanted early Jerico sbf bearing retainer
Looking for an early Jerico small block Ford bearing retainer. Must be for the older 85mm input bearing and for a 4.85 bellhousing bore size. Thanks for your help.-Ed.
Ed Fabian fabe427@aol.com 815-942-0100 days 815-237-5022 nights |
09-08-2018, 10:03 AM | #2 |
Senior Member
Join Date: Dec 2008
Location: Berthoud, Coloraduh
Posts: 695
Likes: 13
Liked 7 Times in 6 Posts
|
Re: Wanted early Jerico sbf bearing retainer
got a casting# for it? maybe a dimension on the throw out bearing surface?
I bought a basket case early jerico that I know the throw out bearing surface is too small for GM... ok, total length is 3.358",t.o.surface is 2.42", diameter is 1.37". brng dia is 89.70mm i'll get the bellhousing register today (forgot to measure yesterday)
__________________
without losers,winning means nothing. Last edited by Tom keedle; 09-09-2018 at 08:37 AM. |
09-08-2018, 04:29 PM | #3 |
Junior Member
Join Date: Aug 2008
Posts: 32
Likes: 16
Liked 9 Times in 6 Posts
|
Re: Wanted early Jerico sbf bearing retainer
Tom,I dont have a casting number. Where the throwout bearing rides is 1.43 inches. The outer part where the bearing retainer sits in the bellhousing is 4.849 inches. Thanks for your help-Ed.
|
09-08-2018, 08:37 PM | #4 |
Junior Member
Join Date: Aug 2012
Location: castalia north carolina
Posts: 81
Likes: 1,958
Liked 16 Times in 11 Posts
|
Re: Wanted early Jerico sbf bearing retainer
David Kee Motorsports has them
|
Thread Tools | Search this Thread |
Display Modes | |
|
|