Canton accusump vs. Moroso accumulator

mishsc · 01-27-2021, 10:12 PM

Can anybody tell me if one is better than the other? Building a new car for Super Stock GT with a big block Chevy. Trying to decide which one to use. Moroso is a little more expensive but if it works better then it's worth it.
Thanks in advance.
Shane

Rsmith38 · 01-28-2021, 09:50 AM

Installed the Moroso 2 years ago. Set at 25 lbs and sitting over Winter 5 months it still showed 20 lbs!! Quality!!! Have not used Canton - may be the same - can't be better. Just my experience.

Bob 1051 Stk

Nmbr1GMfan · 01-28-2021, 10:17 AM

I have no actual use comparison but I just purchased a 1.5qt Moroso heavy duty version (just the end caps are different) and it looks very well constructed.

curtis reed · 01-28-2021, 01:12 PM

Quote:

Originally Posted by mishsc

Can anybody tell me if one is better than the other? Building a new car for Super Stock GT with a big block Chevy. Trying to decide which one to use. Moroso is a little more expensive but if it works better then it's worth it.
Thanks in advance.
Shane

Have had both including the newer heavy duty version Moroso. If you didn't look at which one is installed in the car you would never know. The two you mentioned one is an aluminum tube with end caps held in by large snap rings with o-rings around them and the other has threaded caps screwed into the tube. They both have a piston inside with o-rings on it that slides end to end. Simple pieces really. The heavy duty Moroso version has threaded end caps instead otherwise the same.

Curtis

mishsc · 01-28-2021, 08:09 PM

Thanks for your input guys.

Dano · 01-29-2021, 08:25 AM

Quote:

Originally Posted by mishsc

Can anybody tell me if one is better than the other? Building a new car for Super Stock GT with a big block Chevy. Trying to decide which one to use. Moroso is a little more expensive but if it works better then it's worth it.
Thanks in advance.
Shane

Installed the Moroso on a SC Dragster with a 25lb switch, (which cost as much as the accumulator!), and 10lb of air. Sump held 2 qts of oil.

If/when the oil pressure decreased in shut-down, valve opens, no more issues and piece of mind.

Frank Castros · 01-29-2021, 09:43 AM

Back in the 1970s Mike Canton worked for and developed oil control products for Dick Moroso.

t.tosto · 01-29-2021, 10:12 AM

mishsc, ck. your PM

curtis reed · 01-29-2021, 12:50 PM

Quote:

Originally Posted by Dano

Installed the Moroso on a SC Dragster with a 25lb switch, (which cost as much as the accumulator!), and 10lb of air. Sump held 2 qts of oil.

If/when the oil pressure decreased in shut-down, valve opens, no more issues and piece of mind.

Why the 25lb switch?

Keith 944 · 01-29-2021, 06:31 PM

So if your oil pressure drops below 25 pounds the switch releases the oil in the accumulator and hopefully back to your bearings
I have a Canton and love it

01-27-2021, 10:12 PM	#1
mishsc Member Join Date: Nov 2006 Posts: 106 Likes: 2 Liked 1 Time in 1 Post	Canton accusump vs. Moroso accumulator Can anybody tell me if one is better than the other? Building a new car for Super Stock GT with a big block Chevy. Trying to decide which one to use. Moroso is a little more expensive but if it works better then it's worth it. Thanks in advance. Shane

01-28-2021, 09:50 AM	#2
Rsmith38 Member Join Date: Mar 2011 Posts: 186 Likes: 0 Liked 28 Times in 15 Posts	Re: Canton accusump vs. Moroso accumulator Installed the Moroso 2 years ago. Set at 25 lbs and sitting over Winter 5 months it still showed 20 lbs!! Quality!!! Have not used Canton - may be the same - can't be better. Just my experience. Bob 1051 Stk

01-28-2021, 10:17 AM	#3
Nmbr1GMfan VIP Member Join Date: Aug 2013 Posts: 1,766 Likes: 1,197 Liked 1,957 Times in 492 Posts	Re: Canton accusump vs. Moroso accumulator I have no actual use comparison but I just purchased a 1.5qt Moroso heavy duty version (just the end caps are different) and it looks very well constructed. __________________ Todd Greene

01-28-2021, 08:09 PM	#5
mishsc Member Join Date: Nov 2006 Posts: 106 Likes: 2 Liked 1 Time in 1 Post	Re: Canton accusump vs. Moroso accumulator Thanks for your input guys.

01-29-2021, 09:43 AM	#7
Frank Castros VIP Member Join Date: Nov 2001 Location: The Lowcountry. Posts: 2,641 Likes: 2,154 Liked 2,082 Times in 769 Posts	Re: Canton accusump vs. Moroso accumulator Back in the 1970s Mike Canton worked for and developed oil control products for Dick Moroso.

01-29-2021, 10:12 AM	#8
t.tosto Member Join Date: Aug 2007 Posts: 152 Likes: 105 Liked 61 Times in 22 Posts	Re: Canton accusump vs. Moroso accumulator mishsc, ck. your PM

01-29-2021, 06:31 PM	#10
Keith 944 VIP Member Join Date: Feb 2006 Location: Dela-where? Posts: 2,116 Likes: 1,004 Liked 1,649 Times in 521 Posts	Re: Canton accusump vs. Moroso accumulator So if your oil pressure drops below 25 pounds the switch releases the oil in the accumulator and hopefully back to your bearings I have a Canton and love it __________________ KEITH MAYERS 2 X somebody many X nobody