|
12-10-2017, 11:05 PM | #11 | |
Member
Join Date: Sep 2007
Location: NJ
Posts: 249
Likes: 2
Liked 19 Times in 12 Posts
|
Re: transmission shield required is stock
Quote:
__________________
Frank Bialas 1570 STK |
|
12-10-2017, 11:42 PM | #12 |
Senior Member
Join Date: Feb 2002
Location: Southeast Michigan
Posts: 885
Likes: 63
Liked 221 Times in 102 Posts
|
Re: transmission shield required is stock
I was able to use a CSR shield on by 67 Belvedere but had to do two things . To fit the shield to the trans , I had to cut quite a few bosses off the trans case . The shield fits like a glove , So I have it on the trans before I install it into the car . I have to let the engine tilt down in the back or I can't get at the top two bolts . I did trim back the flange where the trans tunnel to the firewall hangs down , then after the trans is bolted up to the engine , I jack it into place and install the trans crossmember . Its tight but it all fits . I wished that CSR would clearance the shield for the ProTrans band adjustment , and change where the buckle is for the strap , because its is wedged up in the trans tunnel , just move it down a few inches . Glad they are finally making the shields again , they were out of stock for almost a year .
|
12-10-2017, 11:55 PM | #13 |
Veteran Member
Join Date: Mar 2002
Location: Miles From Nowhere
Posts: 7,416
Likes: 2,582
Liked 4,453 Times in 1,694 Posts
|
Re: transmission shield required is stock
Suggest going back to Junior Stock
__________________
We are lucky we don't get as much Government as we pay for..... Will Rogers |
12-11-2017, 12:20 AM | #14 | |
Member
Join Date: Sep 2007
Location: NJ
Posts: 249
Likes: 2
Liked 19 Times in 12 Posts
|
Re: transmission shield required is stock
Quote:
__________________
Frank Bialas 1570 STK |
|
12-11-2017, 12:29 AM | #15 |
Member
Join Date: Jun 2003
Posts: 184
Likes: 0
Liked 11 Times in 6 Posts
|
Re: transmission shield required is stock
|
12-11-2017, 12:31 AM | #16 |
Member
Join Date: Jul 2007
Location: Georgia
Posts: 154
Likes: 2
Liked 30 Times in 9 Posts
|
Re: transmission shield required is stock
Removable tunnel would be nice.
__________________
Michael Brand II 505B - F/SA |
12-11-2017, 04:37 AM | #17 |
Senior Member
Join Date: Feb 2008
Location: Georgetown, Indiana (close to Louisville, KY)
Posts: 760
Likes: 492
Liked 224 Times in 103 Posts
|
Re: transmission shield required is stock
I asked the other day about just putting shield on inside of car "on top" of tunnel since your MAIN objective is protection for driver and didn't get an answer OR IS IT PROTECTION OF SURFACE from oil downs?
|
12-11-2017, 07:03 AM | #18 | |
Senior Member
Join Date: Feb 2002
Location: Southeast Michigan
Posts: 885
Likes: 63
Liked 221 Times in 102 Posts
|
Re: transmission shield required is stock
Quote:
|
|
12-11-2017, 08:25 AM | #19 |
VIP Member
Join Date: Dec 2006
Location: West Virginia
Posts: 1,367
Likes: 6
Liked 57 Times in 27 Posts
|
Re: transmission shield required is stock
Is this rule because there are so many transmission explosions in stock?
__________________
Chris Bowman The Mountain State Mustang 1984 Mustang GT350 |
12-11-2017, 11:32 AM | #20 | |
Senior Member
Join Date: Feb 2017
Location: Las Vegas, Nv
Posts: 747
Likes: 183
Liked 1,069 Times in 334 Posts
|
Re: transmission shield required is stock
Quote:
Darn blankets get super dirty. Drag your straps throw the water box for a little extra cooling. |
|
|
|