|
![]() |
#1 |
Junior Member
Join Date: Apr 2024
Posts: 5
Likes: 0
Liked 2 Times in 1 Post
|
![]()
I am putting a Jerico 4-speed into 1969 camaro BBC with a caltracs setup. Stock Elminator car, so so stock location on everything. I really want to get the clutch setup and car dialed in the end of this season, but Jegs sent me a Bellhousing with a bad SFI sticker. The bellhousing is backordered everywhere and isn't expected to ship until 8/26.
The plan was to get everything setup and measure for a driveshaft, but I think that would put me out past the end of the season if I wait for the bellhousing, measure, and then order a custom shaft. I am willing to do that, but my thoughts are that we are not running a unicorn here and the driveshaft length is likely known. So - anyone running a 69 with a BBC and a Jerico and can let me know what he driveshaft length is? TIA |
![]() |
![]() |
Liked |
![]() |
#2 |
Member
Join Date: Jun 2007
Location: NJ
Posts: 348
Likes: 55
Liked 126 Times in 60 Posts
|
![]()
You can get a driveshaft from strange in a few days
|
![]() |
![]() |
![]() |
|
|