|
04-18-2017, 01:09 PM | #1 |
Junior Member
Join Date: Mar 2012
Posts: 49
Likes: 0
Liked 124 Times in 9 Posts
|
Manifold Mayhem
Yes, it's old news but since the Edelbrock LD340 is legal for 1968-70 340 Stock Eliminator applications, wouldn't the same logic apply in allowing the DP4B for the 383 and CH4B on the 440 as acceptable intakes?
While we're at it, the 426 HEMI Rat Roaster intake carries a Chrysler PN. so theoretically is should be legal in Stock, correct? The Genie is out of the bottle now and is not coming down the return road anytime soon. |
04-18-2017, 01:41 PM | #2 | |
Member
Join Date: Mar 2002
Location: usa
Posts: 239
Likes: 7
Liked 21 Times in 8 Posts
|
Re: Manifold Mayhem
Quote:
|
|
04-18-2017, 01:46 PM | #3 |
Junior Member
Join Date: Mar 2012
Posts: 49
Likes: 0
Liked 124 Times in 9 Posts
|
Re: Manifold Mayhem
|
04-18-2017, 06:15 PM | #4 |
Junior Member
Join Date: Jul 2014
Location: northern Minnesota
Posts: 64
Likes: 0
Liked 0 Times in 0 Posts
|
Re: Manifold Mayhem
How about if the manifold had to look stock on the out side. Any things goes inside. One less thing for tech to check.
|
04-18-2017, 06:40 PM | #5 |
Member
Join Date: Apr 2005
Posts: 495
Likes: 6
Liked 24 Times in 15 Posts
|
Re: Manifold Mayhem
I think they ought to pick a manifold that is still in production, something under $300. I'd think the Edelbrock Performer might work good for the 273-4 and the 1970s 318-4 combos. I think the ports are too small for a 340 or 360.
Chrysler has replacement Street Hemi intakes available, and A&A makes the crossrams for the Hemi and MW engines. I'm not sure if the A&A repros are already legal? Do they have the OEM casting numbers in them? I think the price of LD340s doubled since they became legal. I'd be in favor of aftermarket intakes that are in production for all brands. We all have to pay crazy prices for OEM iron intakes. I was able to find an LD4B for a 273 Mopar and haven't found the OEM iron one close to me. Shipping an iron intake adds enough cost to where the aluminum one was cheaper for me.
__________________
Mopar 2 Ya! |
04-18-2017, 07:08 PM | #6 |
VIP Member
Join Date: Dec 2007
Location: Arizona, Texan forever
Posts: 1,115
Likes: 719
Liked 458 Times in 173 Posts
|
Re: Manifold Mayhem
Found 3462848, 340 engine, 1970 on Craigslist list, Phoenix if any interest (not me) $100
__________________
Gary Hansen - SS/FA 4911, B/SA 4911 |
04-18-2017, 07:22 PM | #7 | |
Senior Member
Join Date: Jul 2014
Posts: 561
Likes: 33
Liked 47 Times in 32 Posts
|
Re: Manifold Mayhem
Quote:
Bound to be worth a hundred HP right Last edited by Coleydog; 04-18-2017 at 07:25 PM. |
|
|
|