Brake lines

Kenny Wigington · 12-09-2008, 07:02 PM

What size SS braided lines would be for replacing the stock rubber lines ?. I am getting some new aftermarket front brakes, and was looking for the size for both ends and an approximate length needed.

What bearing grease does everyone like ? Synthetic , I am guessing....

Thanks

SSDiv6 · 12-09-2008, 07:16 PM

Quote:

Originally Posted by Kenny Wigington

What size SS braided lines would be for replacing the stock rubber lines ?. I am getting some new aftermarket front brakes, and was looking for the size for both ends and an approximate length needed.

What bearing grease does everyone like ? Synthetic , I am guessing....

Thanks

There are companies like Goodridge that sells the specific brake lines, properly crimped and leak tested. For bearing grease, get the grease sold by Lamb.

Bill Grubbs · 12-09-2008, 07:18 PM

Kenny,
We use -3 to each caliper (front or rear) and -4 for the front to rear run (each end of the hard line). Make sure teflon lined hose is used. They are relatively easy to make if you are careful and pay attention to what you do.

Bill

Kenny Wigington · 12-10-2008, 09:28 AM

Thanks to you both ! Hi Bill, thanks for your help at Atlanta again. Say Hello to Brenda for me!

Merry Christmas all !

12-09-2008, 07:02 PM	#1
Kenny Wigington Senior Member Join Date: Sep 2004 Location: Cumming,Ga. USA Posts: 967 Likes: 36 Liked 60 Times in 12 Posts	Brake lines What size SS braided lines would be for replacing the stock rubber lines ?. I am getting some new aftermarket front brakes, and was looking for the size for both ends and an approximate length needed. What bearing grease does everyone like ? Synthetic , I am guessing.... Thanks __________________ 2894 STK

12-09-2008, 07:18 PM	#3
Bill Grubbs Member Join Date: Oct 2002 Location: Magnolia, Texas Posts: 406 Likes: 1 Liked 464 Times in 62 Posts	Re: Brake lines Kenny, We use -3 to each caliper (front or rear) and -4 for the front to rear run (each end of the hard line). Make sure teflon lined hose is used. They are relatively easy to make if you are careful and pay attention to what you do. Bill

12-10-2008, 09:28 AM	#4
Kenny Wigington Senior Member Join Date: Sep 2004 Location: Cumming,Ga. USA Posts: 967 Likes: 36 Liked 60 Times in 12 Posts	Re: Brake lines Thanks to you both ! Hi Bill, thanks for your help at Atlanta again. Say Hello to Brenda for me! Merry Christmas all ! __________________ 2894 STK