|
08-20-2008, 05:22 PM | #1 |
Member
Join Date: Jan 2002
Location: PLACERVILLE, CA
Posts: 182
Likes: 0
Liked 0 Times in 0 Posts
|
Weight Bar Tabs
Anyone have the specs. for weight bar tabs? It's not clear in the rule book. Just states (2) 1/2" bolts per 100lbs. and what the construction of the box or bar should be.
Thanks on advance |
08-20-2008, 10:29 PM | #2 |
VIP Member
Join Date: Jan 2003
Location: Allentown,PA
Posts: 2,436
Likes: 776
Liked 700 Times in 204 Posts
|
Re: Weight Bar Tabs
SFI spec chassis require weight bar mounts to be a minimum of 1/8" gusseted chrome moly tabs ....A weight box would require a minimum of 2 such tabs on the frame rail or crossmember. .... It is also acceptable to bolt thru a crossmember or frame rail on non SFI spec cars, such as most S/SS classes....Tech guys usuall frown at boxes bolted thru the trunk floor. .....Tom
__________________
Tom Goldman 1500 SG , 1506 STK |
08-21-2008, 07:12 PM | #3 |
Member
Join Date: Jan 2002
Location: PLACERVILLE, CA
Posts: 182
Likes: 0
Liked 0 Times in 0 Posts
|
Re: Weight Bar Tabs
Thanks,
Tom |
|
|