|
02-21-2019, 11:19 AM | #1 |
VIP Member
Join Date: Nov 2009
Location: Egg Harbor Township, NJ
Posts: 1,377
Likes: 1,145
Liked 3,494 Times in 426 Posts
|
Can You Help Me Find This?
A 58 tooth timing wet belt-in-oil, 3/4" wide. I believe it came off a SVO Mustang in the 80s? Been trying to see who made them for Ford and if I can find some anywhere. Been trying to contact Gates to see if they made them back in the day but no response yet. Googling these numbers hasn't gotten me anywhere. Thanks in advance.
E6ZM 6268 T302 05ou Last edited by Bobby Fazio; 02-21-2019 at 11:45 AM. |
02-21-2019, 01:02 PM | #2 | |
Member
Join Date: Feb 2010
Posts: 270
Likes: 1
Liked 7 Times in 5 Posts
|
Re: Can You Help Me Find This?
Quote:
I doubt that this has anything to do with a SVO Mustang as they were 2300's with a dry cam drive belt. The is an old belt from a belt drive timing gear set that Ford Motorsport sold for the 289-302-351W that ran in oil. The belt part number for it is M-6268-T302 as seen on the belt. I do not remember the number for the complete belt drive kit, just the belt itself. I do not know of anyone who used one so I do not know how reliable they were. best regards, Roland |
|
Liked |
02-21-2019, 01:25 PM | #3 |
Member
Join Date: Dec 2006
Location: Charlevoix, MI
Posts: 421
Likes: 94
Liked 85 Times in 33 Posts
|
Re: Can You Help Me Find This?
According to Ford I did a search and that belt is obsolete from them. Here is the old part number if that helps you: E5ZZ-6268-A
The number you have on the belt is an engineering number.
__________________
Bobby Lundholm 3516 G/SA |
Liked |
02-21-2019, 01:39 PM | #4 |
VIP Member
Join Date: Jun 2006
Posts: 3,349
Likes: 327
Liked 280 Times in 150 Posts
|
Re: Can You Help Me Find This?
Dayco made that belt
|
02-21-2019, 03:17 PM | #5 |
Member
Join Date: Aug 2002
Location: Florida
Posts: 103
Likes: 79
Liked 12 Times in 6 Posts
|
Re: Can You Help Me Find This?
|
02-21-2019, 05:05 PM | #6 |
Member
Join Date: Apr 2006
Posts: 330
Likes: 55
Liked 184 Times in 37 Posts
|
Re: Can You Help Me Find This?
The old Ford number interchanges to a Dayco #95014 Check with a local jobber or Advance Auto carries Dayco products
|
02-21-2019, 07:57 PM | #7 |
Member
Join Date: May 2011
Location: Auburndale,Florida
Posts: 201
Likes: 20
Liked 57 Times in 32 Posts
|
Re: Can You Help Me Find This?
Bobby, At the risk of dating myself...I found one of my old SVO catalogs.”The camshaft drive system “ as it was called was PN M-6268-U302. The listed part number for the replacement belt was M-6268-S351.
I talked to Alex Denysenko about this setup at one time. He said almost nobody used it. Alex thought the belt was a weak spot being that it ran in oil.I would think it’d help harmonics and possibly free up some parasitic horsepower, but so would a jesel belt drive. Hope this helps. |
Liked |
02-21-2019, 08:21 PM | #8 |
VIP Member
Join Date: Jun 2006
Posts: 3,349
Likes: 327
Liked 280 Times in 150 Posts
|
Re: Can You Help Me Find This?
Do a little research on BIO ( belt in oil)belts -used by many manufacturers both in European and Domestic engines --- how well it will work in a hi rpm application I don't know further research would be necessary
|
02-21-2019, 10:39 PM | #9 |
VIP Member
Join Date: Feb 2003
Location: Glendale, Arizona
Posts: 2,991
Likes: 693
Liked 1,457 Times in 543 Posts
|
Re: Can You Help Me Find This?
Bobby,
I have one of the timing belt setups. Sometime ago I did the research for the replacement belt since the numbering system, as it is for bearings and seals, is an SAE specification. There are industrial belts that will work as a replacement. Also, there are belts designed under the numbering system to work immersed in hot oil. |
02-22-2019, 08:26 AM | #10 |
VIP Member
Join Date: Nov 2009
Location: Egg Harbor Township, NJ
Posts: 1,377
Likes: 1,145
Liked 3,494 Times in 426 Posts
|
Re: Can You Help Me Find This?
Thank you all for your help that is why I love this site. So it turns out it was definitely not from the 2300 SVO which is a much longer and dry belt. But rather this was a “competition” upgrade from chain to belt. The part number M-6268-T302 is the belt for the M-6268-U302 kit. Obsolete indeed but would be nice to know if Dayco or Gates could still crank one out. Ran it on my super stocker for 9 years believe it or not.
|
|
|