Need a-arm front suspension help/suggestions after near miss

[cad]

Originally Posted by Alan Nyhus

I used these Moog offset control arm shafts and Energy Suspension urethane bushings. They have a large diameter stud and lock nut in place of the small factory bolt.
[/URL] Global West makes a great setup and Afco has greaseable steel control arm bushings.

Alan,
Which part number did you use? K5250? Jegs is not model specific enough to be certain.

Thanks
Clark

[Alan Nyhus]

Originally Posted by cad

Alan,
Which part number did you use? K5250? Jegs is not model specific enough to be certain.
Thanks
Clark

Yes, pn# K5250. -Al

[Run to Rund]

Some upper A arms use grade 8, 3/8" fine thread bolts at the ends of the shafts. Others have longer shafts with big nuts on the ends. If header clearance allows, you could use them instead.

[FLEMING]

I redid the front end of my 74 nova last spring and used the afco bushings moog offset top shafts and long ball joints.. made a HUGE difference in my car.. It is so smooth now and drives much better... Would do it again in a heartbeat..