question about what class would this combo be

lrss · 10-17-2009, 11:30 AM

Its a straight six, 292 cubic inch (30 over). It was ran in j/gas back in modified eliminator days. Its a 301 cubic inch and was ran in a 67 camaro with a stick behind it but im wanting to put it in a 67 chevy 2 what class would this car run in super stock? Thanks for the help...

Mike Carr · 10-17-2009, 11:56 AM

The 6 cylinder Super Stock modified classes are:
-SS/DS, 12.00 or more pounds/cid; 2,900 pound minumum, single 750 carb; sticks limited to four forward speeds (same motor in a half-ton, 1990 and newer truck would be SS/TD, should you choose a truck combo, and same rules apply as SS/DS)
-SS/GM, 10.50 or more pounds/cid, non-supercharged inline 4 and 6 cylinder and straight 8 engines with stock production-type heads; two- four barrel or three- two barrel American production carburetors; sticks can be 3, 4 or 5 speed
-SS/AX, 8.50-10.99 pounds/cid; any standard OEM carburetor(s) also OEM or NHRA-accepted aftermarket OEM-type fuel injection permitted; sticks maximum five forward speeds
-SS/BX, 11.00-12.49 pounds/cid; any carb(s), 5 speed
-SS/CX 12.50 or more pounds/cid; any carb(s); 5 speed

Mike Carr · 10-17-2009, 12:05 PM

If you used the stock, 250 cid/155hp motor in a two door coupe or sedan, it would fit SS/PA.

10-17-2009, 11:30 AM	#1
lrss Junior Member Join Date: Oct 2009 Posts: 1 Likes: 0 Liked 0 Times in 0 Posts	question about what class would this combo be Its a straight six, 292 cubic inch (30 over). It was ran in j/gas back in modified eliminator days. Its a 301 cubic inch and was ran in a 67 camaro with a stick behind it but im wanting to put it in a 67 chevy 2 what class would this car run in super stock? Thanks for the help...

10-17-2009, 11:56 AM	#2
Mike Carr VIP Member Join Date: Nov 2001 Location: Enon Valley PA Posts: 1,650 Likes: 234 Liked 80 Times in 34 Posts	Re: question about what class would this combo be The 6 cylinder Super Stock modified classes are: -SS/DS, 12.00 or more pounds/cid; 2,900 pound minumum, single 750 carb; sticks limited to four forward speeds (same motor in a half-ton, 1990 and newer truck would be SS/TD, should you choose a truck combo, and same rules apply as SS/DS) -SS/GM, 10.50 or more pounds/cid, non-supercharged inline 4 and 6 cylinder and straight 8 engines with stock production-type heads; two- four barrel or three- two barrel American production carburetors; sticks can be 3, 4 or 5 speed -SS/AX, 8.50-10.99 pounds/cid; any standard OEM carburetor(s) also OEM or NHRA-accepted aftermarket OEM-type fuel injection permitted; sticks maximum five forward speeds -SS/BX, 11.00-12.49 pounds/cid; any carb(s), 5 speed -SS/CX 12.50 or more pounds/cid; any carb(s); 5 speed __________________ Mike Carr, Tri-State S/SS Association President Looking for 2015 S/SS Race Sponsors Contact me if interested buffdaddy_1302@hotmail.com (724) 510-5912 Last edited by Mike Carr; 10-17-2009 at 12:07 PM. Reason: FI permitted in SS/MX

10-17-2009, 12:05 PM	#3
Mike Carr VIP Member Join Date: Nov 2001 Location: Enon Valley PA Posts: 1,650 Likes: 234 Liked 80 Times in 34 Posts	Re: question about what class would this combo be If you used the stock, 250 cid/155hp motor in a two door coupe or sedan, it would fit SS/PA. __________________ Mike Carr, Tri-State S/SS Association President Looking for 2015 S/SS Race Sponsors Contact me if interested buffdaddy_1302@hotmail.com (724) 510-5912