|
08-18-2010, 10:52 AM | #1 |
Member
Join Date: Oct 2008
Location: PORT ST JOHN FLORIDA
Posts: 226
Likes: 0
Liked 0 Times in 0 Posts
|
What size fuel line/methanol
Im replumbing my car after 15 years or so because i took one of my lines apart and the fittings were rotted inside from the methanol!! I run a rear mounted fuel cell in a door car with a 4150 carb.right now my lines are 1/2" aluminum and -8 for the feed and return...im changing to all braided hose to get away from as much bare alum as possible..my question is do you run -8hose or -10 hose or -10 for feed/-8 return thanks
scott fifield |
08-18-2010, 01:30 PM | #2 |
Member
Join Date: Jun 2007
Location: WEST SENECA N.Y.
Posts: 140
Likes: 0
Liked 0 Times in 0 Posts
|
Re: What size fuel line/methanol
# 10 stuff for all
__________________
jj h/r 1399 s/r 1399 s/g 1399 |
08-18-2010, 04:54 PM | #3 | |
Senior Member
Join Date: Jul 2007
Location: Nothern IL
Posts: 596
Likes: 1
Liked 1 Time in 1 Post
|
Re: What size fuel line/methanol
Quote:
You might want to consider a smaller front mounted fuel cell as then the g-forces work with you not against you and the lines are shorter.
__________________
Bill Baer 3391 SC, 339B SC, QR Last edited by Bill Baer; 08-18-2010 at 04:59 PM. |
|
08-18-2010, 08:08 PM | #4 |
VIP Member
Join Date: Aug 2002
Location: Fayetteville, n.c.
Posts: 1,411
Likes: 0
Liked 1 Time in 1 Post
|
Re: What size fuel line/methanol
I just redid mine with a similar combo. I had 1/2 inch aluminum. Which was fine. I replaced it with #10
|
|
|