|
09-24-2018, 10:06 PM | #29 |
Junior Member
Join Date: Aug 2018
Location: Colorado Springs Colorado
Posts: 28
Likes: 2
Liked 85 Times in 15 Posts
|
Re: 302 Chevrolet Engine Build
Thank you
I bored the block, had to go 4.034 to get it to clean up. Next I will deburr the deck and bottom of the bores, and relieve the bottom of the bores for honing over stroke, from there it will be honed to 4.040. The balancing will be done after the block is done. |
Liked |
|
|