WANTED: 8" converter to get 6300 behind 355sbc

casrak7 · 05-01-2019, 05:08 PM

Need good 8" converter to work with 3000 lb footbrake car. 355 sbc making 630hp / 480tq. TH350 trans w/ stock gearing. Shifting at 8000. 26x10 tire/4.30 gear for now. Will add more gear as needed.

Jeff Stout · 05-01-2019, 07:07 PM

I believe I have 1 Munsinger converter that was 6100 behind 400 SBC with 400T and 4.30 gear with 30 tall tire. 10.04 at 131.5 MPH Weight was 3360. I could double check to make sure they are 8 inch but I'm in AZ. Also a Hughes 5800 in same car went 10.15 @ 130 MPH

casrak7 · 05-01-2019, 09:08 PM

can you get me the numbers on it? How heavy was the car?

Mike Semeniuk · 05-06-2019, 12:48 AM

I have a couple of 8 inch that might thr bill. Both ATIs. PM me and I'll send what ever info you want or a phone number. Thanks

casrak7 · 05-07-2019, 05:48 PM

It wont let me PM, Mike....?

Mike Semeniuk · 05-10-2019, 11:09 PM

let me check to see if anything came.

James Perrone · 05-11-2019, 08:48 AM

Your not gonna find and 8 inch that loose.
7 inch converter yes. Good luck

camaroinmotion · 05-11-2019, 11:51 AM

I have a 8 inch...was behind a 355. It had. 5500. Stall. Lmk if you interested. 484 877 1783

Jeff Stout · 05-14-2019, 01:04 PM

I did sell the Munsinger. The Hughes measured 9 inches on the outside and has the following numbers
C7SC+ 1/8

400 c x-5 B110

Mike Semeniuk · 05-14-2019, 06:16 PM

Casrac7
I did get your PM and sent reply, at least that's what the out box tells me. If it helps one converter was 6100 and then other was 6300 ATI inch. See if you got the PM reply. Thanks

05-01-2019, 05:08 PM	#1
casrak7 Junior Member Join Date: Jul 2011 Posts: 63 Likes: 0 Liked 3 Times in 2 Posts	WANTED: 8" converter to get 6300 behind 355sbc Need good 8" converter to work with 3000 lb footbrake car. 355 sbc making 630hp / 480tq. TH350 trans w/ stock gearing. Shifting at 8000. 26x10 tire/4.30 gear for now. Will add more gear as needed.

05-01-2019, 07:07 PM	#2
Jeff Stout VIP Member Join Date: Dec 2001 Location: phoenix Posts: 1,407 Likes: 53 Liked 654 Times in 254 Posts	Re: WANTED: 8" converter to get 6300 behind 355sbc I believe I have 1 Munsinger converter that was 6100 behind 400 SBC with 400T and 4.30 gear with 30 tall tire. 10.04 at 131.5 MPH Weight was 3360. I could double check to make sure they are 8 inch but I'm in AZ. Also a Hughes 5800 in same car went 10.15 @ 130 MPH

05-01-2019, 09:08 PM	#3
casrak7 Junior Member Join Date: Jul 2011 Posts: 63 Likes: 0 Liked 3 Times in 2 Posts	Re: WANTED: 8" converter to get 6300 behind 355sbc can you get me the numbers on it? How heavy was the car?

05-06-2019, 12:48 AM	#4
Mike Semeniuk Junior Member Join Date: Aug 2004 Location: Sherwood Park, Alberta Posts: 99 Likes: 19 Liked 6 Times in 2 Posts	Re: WANTED: 8" converter to get 6300 behind 355sbc I have a couple of 8 inch that might thr bill. Both ATIs. PM me and I'll send what ever info you want or a phone number. Thanks __________________ Mike Semeniuk 632 GTMA

05-07-2019, 05:48 PM	#5
casrak7 Junior Member Join Date: Jul 2011 Posts: 63 Likes: 0 Liked 3 Times in 2 Posts	Re: WANTED: 8" converter to get 6300 behind 355sbc It wont let me PM, Mike....?

05-10-2019, 11:09 PM	#6
Mike Semeniuk Junior Member Join Date: Aug 2004 Location: Sherwood Park, Alberta Posts: 99 Likes: 19 Liked 6 Times in 2 Posts	Re: WANTED: 8" converter to get 6300 behind 355sbc let me check to see if anything came. __________________ Mike Semeniuk 632 GTMA

05-11-2019, 08:48 AM	#7
James Perrone VIP Member Join Date: Feb 2004 Location: LONG ISLAND N.Y. Posts: 1,595 Likes: 2,929 Liked 1,606 Times in 376 Posts	Re: WANTED: 8" converter to get 6300 behind 355sbc Your not gonna find and 8 inch that loose. 7 inch converter yes. Good luck __________________ james perrone 1290 STK

05-11-2019, 11:51 AM	#8
camaroinmotion Member Join Date: Feb 2019 Posts: 112 Likes: 1 Liked 6 Times in 3 Posts	Re: WANTED: 8" converter to get 6300 behind 355sbc I have a 8 inch...was behind a 355. It had. 5500. Stall. Lmk if you interested. 484 877 1783

05-14-2019, 01:04 PM	#9
Jeff Stout VIP Member Join Date: Dec 2001 Location: phoenix Posts: 1,407 Likes: 53 Liked 654 Times in 254 Posts	Re: WANTED: 8" converter to get 6300 behind 355sbc I did sell the Munsinger. The Hughes measured 9 inches on the outside and has the following numbers C7SC+ 1/8 400 c x-5 B110

05-14-2019, 06:16 PM	#10
Mike Semeniuk Junior Member Join Date: Aug 2004 Location: Sherwood Park, Alberta Posts: 99 Likes: 19 Liked 6 Times in 2 Posts	Re: WANTED: 8" converter to get 6300 behind 355sbc Casrac7 I did get your PM and sent reply, at least that's what the out box tells me. If it helps one converter was 6100 and then other was 6300 ATI inch. See if you got the PM reply. Thanks __________________ Mike Semeniuk 632 GTMA