|
10-25-2014, 08:09 AM | #1 |
Senior Member
Join Date: Mar 2009
Location: Trussville, Alabama-Originally from Vidalia,GA
Posts: 642
Likes: 10
Liked 3 Times in 3 Posts
|
Windshield Washer Message
Need some help on a 07 5.3 GMC Sierra pickup. The warning message comes on the windshield washer is low every time I start it up, but it's not
it's full. Goes off when I reset the mileage. Any help would be appreciated. FrankChastain |
10-26-2014, 01:25 AM | #2 |
VIP Member
Join Date: Dec 2007
Location: Woodlawn IL
Posts: 1,093
Likes: 162
Liked 219 Times in 79 Posts
|
Re: Windshield Washer Message
Take a look at the sensor in the tank. It probably has something on it. After you clean it or replace it ( I would recommend replacing it). IF you dont have a scan tool to reset it. Sometimes you can disconnect the battery for 2-4 hours and it will reset. While you are at it take a look at the connector in the wiring harness and make sure it is not corroded. If it is you can get a new one from NAPA.
Last edited by Rob Petrie E395; 10-26-2014 at 01:29 AM. |
10-26-2014, 06:20 AM | #3 | |
Senior Member
Join Date: Mar 2009
Location: Trussville, Alabama-Originally from Vidalia,GA
Posts: 642
Likes: 10
Liked 3 Times in 3 Posts
|
Re: Windshield Washer Message
Quote:
Thanks Rob for the info.....Thanks again Frank |
|
Thread Tools | |
Display Modes | |
|
|