|
01-14-2018, 09:42 AM | #1 |
Junior Member
Join Date: Oct 2012
Posts: 79
Likes: 0
Liked 16 Times in 11 Posts
|
powerglide question
If you run Powerglide with pro tree brake (push button for reverse) you have 2 safety
it's safe, what the problem? |
01-14-2018, 10:07 AM | #2 |
Member
Join Date: Aug 2010
Location: CT
Posts: 386
Likes: 1,255
Liked 248 Times in 107 Posts
|
Re: powerglide question
Not quite sure what you're asking???
__________________
Phil Molski S/C 1623 |
01-14-2018, 10:39 AM | #3 |
Junior Member
Join Date: Oct 2012
Posts: 79
Likes: 0
Liked 16 Times in 11 Posts
|
Re: powerglide question
It is dangerous to push in neutral after the win light? i have pro tree brake (button must be actived for reverse)
|
01-14-2018, 10:39 AM | #4 |
VIP Member
Join Date: Dec 2008
Location: Richmond Hill GA (and Port Ludlow WA)
Posts: 4,122
Likes: 1,978
Liked 2,705 Times in 853 Posts
|
Re: powerglide question
Don't be frustrated ghost; being from Quebec I'm guessing French is your first language...you might try running it through one of the translator apps...and no, not a danger clicking it into neutral.
__________________
Jim Carter 2340 Super Stock 2340 SST/2340 Stock |
01-14-2018, 11:20 AM | #5 |
Senior Member
Join Date: Feb 2002
Location: Southeast Michigan
Posts: 885
Likes: 63
Liked 221 Times in 102 Posts
|
Re: powerglide question
If its a forward pattern VB its probably safe . A reverse pattern VB that by accident goes back into 1st gear instead of going from High gear to Neutral might be a problem. That is why there are a few VB's out there , that have a clean Neutral , so you never have to shift across a lower gear to get back to Neutral .
|
01-14-2018, 11:31 AM | #6 |
Junior Member
Join Date: Oct 2012
Posts: 79
Likes: 0
Liked 16 Times in 11 Posts
|
Re: powerglide question
Merci beaucoup
Thankyou |
01-14-2018, 03:50 PM | #7 |
Member
Join Date: Jan 2005
Location: North Massapequa, NY
Posts: 218
Likes: 0
Liked 0 Times in 0 Posts
|
Re: powerglide question
I thought it was bad to put a glide into neutral after crossing the line as it over spins the drum and can explode?
|
01-14-2018, 09:08 PM | #8 |
Member
Join Date: Feb 2008
Location: Black Creek, BC Canada
Posts: 312
Likes: 62
Liked 137 Times in 67 Posts
|
Re: powerglide question
|
01-15-2018, 10:15 AM | #9 | |
VIP Member
Join Date: Jan 2003
Location: Allentown,PA
Posts: 2,436
Likes: 776
Liked 700 Times in 204 Posts
|
Re: powerglide question
Quote:
There is plenty of lubrication for the tailshaft ,especially since so many run the roller bearings.
__________________
Tom Goldman 1500 SG , 1506 STK |
|
|
|