|
04-26-2018, 02:34 AM | #11 |
VIP Member
Join Date: Jun 2009
Location: Boulder City, Nevada 89005
Posts: 2,530
Likes: 2,222
Liked 1,805 Times in 572 Posts
|
Re: Mounting Turbo Action Shifter
We do our like Rick said in our A Body stuff.
Round tubing with plates on both sides that brings it up a foot to foot and half above floor. I can E Mail you pics if you like. Mine is just a couple inches from the wheel so to reduce movement after leaving line. Of course......I am old and move slowly!
__________________
John Irving 741 Stock 741 Super Stock |
04-26-2018, 09:27 AM | #12 |
Member
Join Date: Jun 2010
Location: VA
Posts: 228
Likes: 23
Liked 21 Times in 13 Posts
|
Re: Mounting Turbo Action Shifter
John, I'd like to see that picture, thanks. I'll PM my email
Brian
__________________
Brian Carpenter Stock 1358 |
04-26-2018, 03:23 PM | #13 |
VIP Member
Join Date: Jun 2009
Location: Boulder City, Nevada 89005
Posts: 2,530
Likes: 2,222
Liked 1,805 Times in 572 Posts
|
Re: Mounting Turbo Action Shifter
I will take pics as soon as I am back from Muscle cars at Strip
Stock/Super Stock on Monday.
__________________
John Irving 741 Stock 741 Super Stock |
04-27-2018, 11:46 AM | #14 |
VIP Member
Join Date: Nov 2001
Location: Florida
Posts: 1,538
Likes: 34
Liked 132 Times in 48 Posts
|
Re: Mounting Turbo Action Shifter
I have a Hurst 1/4 stick but made my floor bracket from a piece of channel iron about 2" wide and 1/2" tall, maybe 1/8" thick. (My local Home Depot sells lengths of it. Drilled it to match the shifter mounting pattern and bolted it together with short 1/4" bolts.Nuts were then welded underneath to stay in place when shifter is removed. Then the channel piece was welded to the floor/tunnel in a comfortable location.
__________________
LOCOMOTION Racing Last edited by Myron Piatek; 04-27-2018 at 11:50 AM. |
|
|