|
04-19-2018, 09:13 AM | #1 |
Member
Join Date: Nov 2003
Location: BOSTON
Posts: 146
Likes: 23
Liked 25 Times in 9 Posts
|
Need Some Input With BBC Roller Lifters
A friend of mine just had a lifter fail and now has to R&R cam/lifters as well as an engine clean up for metal etc - Is there any MFG that you guy's favor now over the rest in the lifter category - Thank's In Advance for any input
|
04-19-2018, 10:58 AM | #2 |
Veteran Member
Join Date: Mar 2005
Location: Sand Springs, OK
Posts: 8,132
Likes: 896
Liked 389 Times in 168 Posts
|
Re: Need Some Input With BBC Roller Lifters
Call Reher & Morrison. David put me onto Isky Red Zones when I was having lifter problems. They have built a lot of big block Chevies, I would expect them to know. They may have something better now.
__________________
Ed Wright 4156 SS/JA |
04-19-2018, 12:44 PM | #3 |
Senior Member
Join Date: Sep 2010
Location: Houston,Texas
Posts: 668
Likes: 1,824
Liked 219 Times in 96 Posts
|
Re: Need Some Input With BBC Roller Lifters
What Ed says
I run Isky 842's in my 358 bracket motor Last edited by nickh; 04-20-2018 at 08:27 AM. |
04-19-2018, 12:46 PM | #4 |
VIP Member
Join Date: Mar 2007
Posts: 2,318
Likes: 546
Liked 1,629 Times in 502 Posts
|
Re: Need Some Input With BBC Roller Lifters
Morrel have been the best for me. Make sure what ever brand you buy has the high pressure pin oiling feature. Also years ago I quit using street car motor oil. I only use a premium quality racing motor oil. Haven't had any lifter problems since.
__________________
Mike Pearson 2485 SS |
04-19-2018, 12:53 PM | #5 |
Junior Member
Join Date: Apr 2016
Posts: 26
Likes: 0
Liked 3 Times in 3 Posts
|
Re: Need Some Input With BBC Roller Lifters
Jesel.....
|
04-19-2018, 01:20 PM | #6 |
Senior Member
Join Date: Nov 2015
Location: Inver Grove Heights, MN
Posts: 898
Likes: 604
Liked 432 Times in 225 Posts
|
Re: Need Some Input With BBC Roller Lifters
I ran Crower HIPPO lifters for many years, changing them out at each freshen. Never a problem.
One season I tried to save a few bucks and used Comp Cams lifters. Lost on in August of their first season, and had to tear everything down for cleanup. I now use the bushed lifters rather than those with needle bearings. I have Isky .842 in one engine and Crower Enduramax .937 in the other. The Iskys went 2.5 seasons before a freshen, and I put them back in where they have run another season. I haven't made enough passes with the Crower to say anything either way, but so far so good.
__________________
S/ST 51 S/C 53 |
04-19-2018, 08:43 PM | #7 |
Member
Join Date: Jun 2007
Location: NJ
Posts: 342
Likes: 54
Liked 124 Times in 58 Posts
|
Re: Need Some Input With BBC Roller Lifters
Bushed lifters are the way to go. They just wear and destroy parts like when a needle bearings go away
|
04-20-2018, 12:44 AM | #8 | |
Member
Join Date: Feb 2007
Location: NORTHEAST
Posts: 287
Likes: 1
Liked 18 Times in 10 Posts
|
Re: Need Some Input With BBC Roller Lifters
Quote:
I tend to go with the Morel lifters if your going to run an .842 lifter as they are to OEM size. ISKY, Crower and Comp lifters run to small to put in an OEM lifter bore. I have found that ISKY lifters have alllllllways had a sizing issues some times it has taken up to 3 sets to make up one set to get the sizing correct, Do a simple search on this problem. If your dealing with an old GM casting you may find the lifters maybe warn do to push rod angles. For a more dependable lifter go with a .904 lifter bigger body, axle and with the .810 wheel less revolutions around the lobe. What ever lifter you buy measure every lifter and check each lifter bore for the proper clearance. Good luck which ever way you go. |
|
04-20-2018, 11:10 AM | #9 | |
Senior Member
Join Date: Aug 2006
Location: Pukwana SD
Posts: 858
Likes: 555
Liked 97 Times in 47 Posts
|
Re: Need Some Input With BBC Roller Lifters
Quote:
|
|
04-21-2018, 06:32 AM | #10 | |
Member
Join Date: Feb 2007
Location: NORTHEAST
Posts: 287
Likes: 1
Liked 18 Times in 10 Posts
|
Re: Need Some Input With BBC Roller Lifters
Quote:
.0014 to .002 is what I shoot for and has been working for me so far. Its really not a Chevy lifter its more of a AMC lifter. He is a good video to watch as there is no standard on sizing between roller lifter companies Last edited by carl hinkson; 04-21-2018 at 06:35 AM. |
|
|
|