3rd gen camaro throttle linkage?

FrankM · 02-19-2012, 06:02 PM

I am setting my camaro to run sst & hr. I am running a throttle stop on the carb and want to convert the cable. Can you guys give me recommendations, solid rod or morse cable? Can you post or send pics?

Thanks,

Frank

FrankM · 02-28-2012, 08:38 AM

I may not have worded the question properly. I am installing a throttle stop (Biondo PCTS-SH) and the factory cable I believe is not a good choice due to too much stretch for consistency. Do you guys have recommendations, solid linkage or morse? I will only be cutting .3 to .5 ET. If you have done this can you send pics.

Thanks,

Frank

Ken MacNicol · 02-28-2012, 12:35 PM

I use a inline with a factory cable and CSR bracket with no problems.

FrankM · 02-28-2012, 01:38 PM

Ken, are you running a dominator or a 4150? Which CSR bracket do you have? I'm running a 4150 and have a CSR bracket for the snap in cable that I've been using without the t-stop but didn't think that will work. Thanks for the help, need all I can get.

Keith 944 · 02-28-2012, 04:15 PM

frank, if you are that close to the index, i would just add weight. this can be VERY consistant. and could save you a lot of time and $.

Ken MacNicol · 02-28-2012, 05:31 PM

I ran a 4150 until last year, but now have a 4500. They do not have a extended bracket for a snap in cable, so I modified mine a little. I still have it if you are interested.

02-19-2012, 06:02 PM	#1
FrankM Junior Member Join Date: Jan 2009 Location: Columbus, OH Posts: 97 Likes: 0 Liked 2 Times in 1 Post	3rd gen camaro throttle linkage? I am setting my camaro to run sst & hr. I am running a throttle stop on the carb and want to convert the cable. Can you guys give me recommendations, solid rod or morse cable? Can you post or send pics? Thanks, Frank

02-28-2012, 08:38 AM	#2
FrankM Junior Member Join Date: Jan 2009 Location: Columbus, OH Posts: 97 Likes: 0 Liked 2 Times in 1 Post	Re: 3rd gen camaro throttle linkage? I may not have worded the question properly. I am installing a throttle stop (Biondo PCTS-SH) and the factory cable I believe is not a good choice due to too much stretch for consistency. Do you guys have recommendations, solid linkage or morse? I will only be cutting .3 to .5 ET. If you have done this can you send pics. Thanks, Frank

02-28-2012, 12:35 PM	#3
Ken MacNicol Junior Member Join Date: Apr 2010 Location: Hendersonville, Tn. Posts: 80 Likes: 764 Liked 23 Times in 10 Posts	Re: 3rd gen camaro throttle linkage? I use a inline with a factory cable and CSR bracket with no problems.

02-28-2012, 01:38 PM	#4
FrankM Junior Member Join Date: Jan 2009 Location: Columbus, OH Posts: 97 Likes: 0 Liked 2 Times in 1 Post	Re: 3rd gen camaro throttle linkage? Ken, are you running a dominator or a 4150? Which CSR bracket do you have? I'm running a 4150 and have a CSR bracket for the snap in cable that I've been using without the t-stop but didn't think that will work. Thanks for the help, need all I can get.

02-28-2012, 04:15 PM	#5
Keith 944 VIP Member Join Date: Feb 2006 Location: Dela-where? Posts: 2,119 Likes: 1,006 Liked 1,653 Times in 524 Posts	Re: 3rd gen camaro throttle linkage? frank, if you are that close to the index, i would just add weight. this can be VERY consistant. and could save you a lot of time and $. __________________ KEITH MAYERS 2 X somebody many X nobody

02-28-2012, 05:31 PM	#6
Ken MacNicol Junior Member Join Date: Apr 2010 Location: Hendersonville, Tn. Posts: 80 Likes: 764 Liked 23 Times in 10 Posts	Re: 3rd gen camaro throttle linkage? I ran a 4150 until last year, but now have a 4500. They do not have a extended bracket for a snap in cable, so I modified mine a little. I still have it if you are interested.