|
12-25-2014, 03:27 PM | #1 |
VIP Member
Join Date: Jun 2002
Posts: 1,855
Likes: 83
Liked 444 Times in 145 Posts
|
Chevy Parts
Small Block 350 Chevy:
10 runs Pair of 993 heads all best parts by Whitaker: $2,250.00 Short Block, +.065 bore, Coated CP Pistons, Total seal Rings, Bushed lifter bores with Schubeck Lifters, latest Bullet Cam, $1950.00 Intakes, 771,751 and 469 all professionally cleaned $275.00 each Used ATI Balancer: $225.00 Also many more intakes, both two barrel and four barrel for 71/72/73 motors: $50.00 each Vic Junior: $95.00 One bone stock Aluminum intake for 69 302/350: $495.00 Stock heads with original valves in place: Pair of 487 $275.00, Pair of 487X $325.00 Fresh Metric race transmission, forward pattern, $1,150.00 Fresh metric Torque converters: $275.00 each 350 Bracket motor, long block (everything but intake), TRW pistons, 993 heads with 2.02 Valves and Lunati crank: $1550.00 350 short block, Stocker 71/72 combo's, Ross pistons, Total Seal Rings, good Comp cam, Block has minor repair but still running strong when I built the 73 combo. Should be freshened: $1,150.00 Chevy Big Block: Aluminum Intakes: Two 359's for 454: $375.00 each One 163 with cut plenum for All Big Blocks $325.00 Big "School Bus" Pan for Big Blocks. Cleaned with trap: $275.00 Big Block Buick 455 Block, cleaned deburred and magnafluxed. It's meant to be the premo block: $475.00. Two pairs of Stage one heads: Cleaned and magnafluxed: Not sure what they are worth. Assorted parts: Two Holroyd Holley carburetors: Very nice condition. Cost $1,000.00+ each but will sell for $575.00 each. Two like new Moroso 24" x 15" tires, eight passes on them $175.00 for pair Two new Weld Aluma Star rear wheels: Slicks were monted on them but they would not fit my car. The slicks were removed and the wheels put back in boxes. GM pattern with 3 1/2" back spacing: $425.00 for pair. New in box FluidDampr for small block Chevy: $175.00 NOS Camaro Hood, 70-81 with GM Stickers still in place. Three very small blemishes: $775.00. Yamaha Generator - 6,500 Watt in great condition. These generators are selling for over $3,000.00 new. Will sell for $995.00. All prices exclude freight: Thanks for reading and Merry Christmas!
__________________
Bruce Noland 1788 STK |
12-25-2014, 05:28 PM | #2 |
Senior Member
Join Date: Jun 2012
Posts: 624
Likes: 513
Liked 878 Times in 196 Posts
|
Re: Chevy Parts
Bruce, tell me about the torque converters, what motor were they behind, stall, shift points, fall back, etc. Merry Christmas!! J.R. Haddad.
|
12-25-2014, 09:51 PM | #3 |
VIP Member
Join Date: Jun 2002
Posts: 1,855
Likes: 83
Liked 444 Times in 145 Posts
|
Re: Chevy Parts
For 350 270 motors. About 420 HP, at 3,450 pounds. All of them in the 5,150 - 5,200 range. Depending on gearing and class, I would shift at 6,500 and then 6,800 usually dropped back about 800 rpm. One PTC, two Dynamics and one AT I. The AT I is probably sold.
__________________
Bruce Noland 1788 STK |
12-26-2014, 11:32 AM | #4 |
VIP Member
Join Date: Dec 2001
Location: Arkansas - In the middle of everything.
Posts: 1,980
Likes: 52
Liked 724 Times in 177 Posts
|
Re: Chevy Parts
Bruce - is it a flat top piston short block?
|
12-26-2014, 02:26 PM | #5 |
Member
Join Date: Jul 2007
Posts: 137
Likes: 0
Liked 5 Times in 4 Posts
|
Re: Chevy Parts
Bruce , does the short block have c-19cp
pistons for the 73 model rated at 287hp . Thanks |
12-26-2014, 03:14 PM | #6 |
VIP Member
Join Date: Jun 2002
Posts: 1,855
Likes: 83
Liked 444 Times in 145 Posts
|
Re: Chevy Parts
The short block is for a 350/270 dish piston motor.
__________________
Bruce Noland 1788 STK |
12-26-2014, 04:05 PM | #7 |
Senior Member
Join Date: Jun 2012
Posts: 624
Likes: 513
Liked 878 Times in 196 Posts
|
Re: Chevy Parts
Bruce, you need to clear some space to accept P.M.'s.
Thanks, J.R. Haddad. |
03-22-2015, 02:02 PM | #8 |
Junior Member
Join Date: Aug 2009
Posts: 10
Likes: 1
Liked 0 Times in 0 Posts
|
Re: Chevy Parts
Hi Bruce,
I'm interested in the 10 inch wheels. Please contact me at flowbenchguy@yahoo.com or call Seven12 three63 threeeight01 Thanks,] Jon Jamison |
03-22-2015, 04:18 PM | #9 |
Member
Join Date: Aug 2005
Posts: 254
Likes: 202
Liked 41 Times in 15 Posts
|
Re: Chevy Parts
Info on the generator please.
|
03-28-2015, 09:56 PM | #10 |
VIP Member
Join Date: Jun 2002
Posts: 1,855
Likes: 83
Liked 444 Times in 145 Posts
|
Re: Chevy Parts
Sorry guys. I thought this ad was burried. The ten wheels have been sold and I sent a pcture of the generator to zenzen. I will try to do a better job of keeping up with this ad in the future. Thanks.
__________________
Bruce Noland 1788 STK |
|
|