lean out valve info for running alchol

S/G 316H · 06-25-2013, 09:59 PM

Does anyone use a legris slide valve for a lean out valve and if so which one do you use part # ?

SG192L · 06-26-2013, 04:50 PM

Yes I use one you can get them from McMaster-Carr it is called a slide-sleeve brass valve part#4622k33 and the price is $23.61 I hope this helps you out.

S/G 316H · 06-26-2013, 11:41 PM

Yes it does.
Does the 1/4 npt lean it out enough?

SG192L · 06-27-2013, 05:58 AM

Yes I have no problem getting enough heat in the motor. I use barbs for 1/2" fuel hose. When the valve is open the motor pickup 500 RPM.

S/G 316H · 06-27-2013, 05:42 PM

Thanks, SG192L

06-25-2013, 09:59 PM	#1
S/G 316H Junior Member Join Date: Jun 2013 Posts: 6 Likes: 0 Liked 0 Times in 0 Posts	lean out valve info for running alchol Does anyone use a legris slide valve for a lean out valve and if so which one do you use part # ?

06-26-2013, 04:50 PM	#2
SG192L Junior Member Join Date: Dec 2012 Posts: 14 Likes: 0 Liked 0 Times in 0 Posts	Re: lean out valve info for running alchol Yes I use one you can get them from McMaster-Carr it is called a slide-sleeve brass valve part#4622k33 and the price is $23.61 I hope this helps you out.

06-26-2013, 11:41 PM	#3
S/G 316H Junior Member Join Date: Jun 2013 Posts: 6 Likes: 0 Liked 0 Times in 0 Posts	Re: lean out valve info for running alchol Yes it does. Does the 1/4 npt lean it out enough?

06-27-2013, 05:42 PM	#5
S/G 316H Junior Member Join Date: Jun 2013 Posts: 6 Likes: 0 Liked 0 Times in 0 Posts	Re: lean out valve info for running alchol Thanks, SG192L Last edited by S/G 316H; 06-27-2013 at 05:53 PM.

06-27-2013, 05:58 AM	#4
SG192L Junior Member Join Date: Dec 2012 Posts: 14 Likes: 0 Liked 0 Times in 0 Posts	Re: lean out valve info for running alchol Yes I have no problem getting enough heat in the motor. I use barbs for 1/2" fuel hose. When the valve is open the motor pickup 500 RPM.