Doug Nash 5 speed and Long Shifter and clutch parts

vegaken · 10-15-2010, 01:50 AM

Doug Nash 5 speed with a 3.09, first gear and 1 to 1, fifth gear. It is a fresh pro-shifted unit. It will fit behind Chevy motors even though it has an 18 spline input shaft. Price for trans is $1000.00

Long Shifter for this trans. It is a pistol grip inline shifter with rod ends for the linkage. Price for shifter is $500

Mark Williams yoke for drive shaft for this trans with a 30 spline output. Cost is $100.

Two Ram aluminum flywheels and pressure plates and clutches for sale also. One set needs to be freshened and the other can be put back in car as it only has about 10 runs on it. To send it back to Ram will cost maybe $200 to get everything back to new. The pressure plate is adjustable from 1900lbs to 2400lbs and the clutch is a metallic six puck disk. I will verify the pressure plates if someone is interested. Cost is $700 for all of these clutch parts and flywheels.

Will sell separate but will also make a deal if someone buys it all.
Please contact me at kgs3791@juno.com

Thanks,
Ken

Ellsworth Cheeks · 10-15-2010, 07:09 PM

I am interested in both clutchses 202870-4938 cheeks

Chris Hill · 10-17-2010, 08:12 PM

Could you run a set-up like that in a street car?

vegaken · 10-18-2010, 06:58 PM

I did years ago with another pro shifted trans. Not this one. It can be done but you have to be careful or you will chew the trans up quickly.

Notch1320 · 10-19-2010, 04:15 PM

Can you send me the input shaft length. Also, who did the freshening, and what are the rest of the ratios?

vegaken · 10-23-2010, 02:29 AM

The ratios of the transmission are:
1st 3.05
2nd 2.07
3rd 1.53
4th 1.24
5th 1.00

10-15-2010, 01:50 AM	#1
vegaken Junior Member Join Date: Sep 2005 Location: NJ Posts: 5 Likes: 0 Liked 0 Times in 0 Posts	Doug Nash 5 speed and Long Shifter and clutch parts Doug Nash 5 speed with a 3.09, first gear and 1 to 1, fifth gear. It is a fresh pro-shifted unit. It will fit behind Chevy motors even though it has an 18 spline input shaft. Price for trans is $1000.00 Long Shifter for this trans. It is a pistol grip inline shifter with rod ends for the linkage. Price for shifter is $500 Mark Williams yoke for drive shaft for this trans with a 30 spline output. Cost is $100. Two Ram aluminum flywheels and pressure plates and clutches for sale also. One set needs to be freshened and the other can be put back in car as it only has about 10 runs on it. To send it back to Ram will cost maybe $200 to get everything back to new. The pressure plate is adjustable from 1900lbs to 2400lbs and the clutch is a metallic six puck disk. I will verify the pressure plates if someone is interested. Cost is $700 for all of these clutch parts and flywheels. Will sell separate but will also make a deal if someone buys it all. Please contact me at kgs3791@juno.com Thanks, Ken Last edited by vegaken; 10-16-2010 at 05:35 PM. Reason: forgot to add the price for the clutch parts.

10-15-2010, 07:09 PM	#2
Ellsworth Cheeks Junior Member Join Date: Apr 2007 Location: wv Posts: 9 Likes: 0 Liked 0 Times in 0 Posts	Re: Doug Nash 5 speed and Long Shifter and clutch parts I am interested in both clutchses 202870-4938 cheeks

10-17-2010, 08:12 PM	#3
Chris Hill Senior Member Join Date: Jan 2002 Posts: 653 Likes: 8 Liked 238 Times in 25 Posts	Re: Doug Nash 5 speed and Long Shifter and clutch parts Could you run a set-up like that in a street car? __________________ Chris Hill https://ihmusedparts.com

10-18-2010, 06:58 PM	#4
vegaken Junior Member Join Date: Sep 2005 Location: NJ Posts: 5 Likes: 0 Liked 0 Times in 0 Posts	Re: Doug Nash 5 speed and Long Shifter and clutch parts I did years ago with another pro shifted trans. Not this one. It can be done but you have to be careful or you will chew the trans up quickly.

10-19-2010, 04:15 PM	#5
Notch1320 Member Join Date: May 2004 Location: Yuba City, CA Posts: 220 Likes: 0 Liked 0 Times in 0 Posts	Re: Doug Nash 5 speed and Long Shifter and clutch parts Can you send me the input shaft length. Also, who did the freshening, and what are the rest of the ratios? __________________ Shawn Allsup K/S 718

10-23-2010, 02:29 AM	#6
vegaken Junior Member Join Date: Sep 2005 Location: NJ Posts: 5 Likes: 0 Liked 0 Times in 0 Posts	Re: Doug Nash 5 speed and Long Shifter and clutch parts The ratios of the transmission are: 1st 3.05 2nd 2.07 3rd 1.53 4th 1.24 5th 1.00