|
11-22-2019, 02:03 AM | #1 |
Junior Member
Join Date: Apr 2008
Posts: 31
Likes: 1
Liked 3 Times in 1 Post
|
Quick Fuel SSR Carberators
Will any of you share your experiences with the Quick Fuel SSR carbs compared to a Holley 3310?
|
11-22-2019, 12:11 PM | #2 |
Junior Member
Join Date: Aug 2015
Posts: 11
Likes: 4
Liked 5 Times in 4 Posts
|
Re: Quick Fuel SSR Carberators
haven't used against 3310 but for the stock 750 dp it's was worth 2/10s
|
11-22-2019, 12:19 PM | #3 |
VIP Member
Join Date: Apr 2003
Location: Tulsa, Oklahoma
Posts: 1,569
Likes: 3,168
Liked 677 Times in 290 Posts
|
Re: Quick Fuel SSR Carberators
I have one that was "race prepped" by Quick Fuel before the merger with Holley. Don't expect any high level racer support from Holley unless you know someone. I don't.
I don't have a Holley to compare, but on a 348 cubic inch engine the SSR made over 2 HP per CI so I don't think it could be really bad. This is a Modified Stock engine, not a standard SS or GT. However the engine is not as radical as it could be. |
11-22-2019, 05:28 PM | #4 |
VIP Member
Join Date: May 2006
Location: Louisville , KY
Posts: 1,994
Likes: 63
Liked 270 Times in 68 Posts
|
Re: Quick Fuel SSR Carberators
We use one in stock on my son Andrew’s car. Scott Perkins did some work on it to get it better than our original 3310. I think Scott could help you. After a bunch of tuning I think the Quick fuel carb is 2 or 3 quicker. Don’t expect a huge improvement if you have a decent carb.
__________________
Greg Hill 4171 STK |
|
|