HOME FORUM RULES CONTACT
     
   
   

Go Back   CLASS RACER FORUM > Class Racer Forums > Stock and Super Stock Tech
Register Photo Gallery FAQ Community Calendar


Reply
 
Thread Tools Display Modes
Old 05-12-2007, 08:54 PM   #1
CCRT
Junior Member
 
Join Date: May 2007
Location: Westford, MA
Posts: 3
Likes: 0
Liked 0 Times in 0 Posts
Default Radial Slick Top End wig-wag Condition

Looking for some help.

We run the M/T 3066R 30 x 9 radial slick on our Camaro.

Car is 3400lbs Tires set to 17.5 psi.

Right around 145 mph the body will wig wag from side to side. Can't feel anything in the steering or chassis. It's all body roll.

Back to back testing today switching to a M/T 28 X 10.5 bias ply corrected the condition.

I really hate to have to go back to the bias tire.

Does any body run these tires at 145-150 mph?

Any help or ideas would be greatly appreciated.

Thanks,

--Dave

1967 Camaro, Street Legal, Naturally Aspirated 406 SBC, 3400#, 9" tires 10.03 @ 132.48 1.40 60' Through the exhaust & Foot-Brakin'
9.07@147 with a little juice :-)
http://home.comcast.net/~ccrt-racing/ccrt.htm
CCRT
--Dave
CCRT is offline   Reply With Quote
Old 05-12-2007, 11:42 PM   #2
Kenny Wigington
Senior Member
 
Kenny Wigington's Avatar
 
Join Date: Sep 2004
Location: Cumming,Ga. USA
Posts: 967
Likes: 36
Liked 60 Times in 12 Posts
Default

You have too much vehicle weight for that pressure. Go up , in small increments, until it spins. You'll know when it begins to. You may wind up in the 19 lb range, maybe a little more. A lot of stockers run upwards of 20 lbs, regularly.

Good Luck !







I hope they will replace that win light , on my side ! It looks like yours still works ?!

STK 2894
__________________
2894 STK
Kenny Wigington is offline   Reply With Quote
Old 05-13-2007, 11:19 AM   #3
tpoh815
Senior Member
 
tpoh815's Avatar
 
Join Date: Oct 2003
Location: West Seneca
Posts: 527
Likes: 48
Liked 18 Times in 8 Posts
Default

it does not hurt to make sure you dont have a broken shock!!

__________________
EX 5-Doorstocker
tpoh815 is offline   Reply With Quote
Old 05-13-2007, 01:24 PM   #4
Barry Polley
Senior Member
 
Join Date: Dec 2003
Location: Vacaville Ca
Posts: 742
Likes: 648
Liked 552 Times in 229 Posts
Default

How many runs on the radials? We changed radials and corrected the problem. In second and third it was hooking and spinning left to right. A two handed deal for sure!

Barry

__________________
Barry Polley 758 A/SA
California- No place to race!
Barry Polley is offline   Reply With Quote
Old 05-13-2007, 08:55 PM   #5
CCRT
Junior Member
 
Join Date: May 2007
Location: Westford, MA
Posts: 3
Likes: 0
Liked 0 Times in 0 Posts
Default

These have about 40 passes....................

But have done it since day one :-(

1967 Camaro, Street Legal, Naturally Aspirated 406 SBC, 3400#, 9" tires 10.03 @ 132.48 1.40 60' Through the exhaust & Foot-Brakin'
9.07@147 with a little juice :-)
http://home.comcast.net/~ccrt-racing/ccrt.htm
CCRT
--Dave
CCRT is offline   Reply With Quote
Old 05-13-2007, 10:25 PM   #6
Sean Ward
Member
 
Sean Ward's Avatar
 
Join Date: Apr 2006
Location: Grand Island FL.
Posts: 389
Likes: 0
Liked 0 Times in 0 Posts
Send a message via AIM to Sean Ward
Default

yeah you need to go up in pressure my car weights 4080# don't run that fast by no means but had same problem with radials at first really bad when i would lift at finsh always felt like assend wanted to pass front end started with 19# but went up in air and took care of the wig wag i run 25#s of air and its like a caddy nice and smooth

sean ward
stk# 2882
__________________
Sean Ward NHRA s/ss/comp#2882
SW4 MOTORSPORTS
Sean Ward is offline   Reply With Quote
Old 05-13-2007, 11:04 PM   #7
Barry Polley
Senior Member
 
Join Date: Dec 2003
Location: Vacaville Ca
Posts: 742
Likes: 648
Liked 552 Times in 229 Posts
Default

Dave,
At 3610 we run 20 -21 on a good track.


__________________
Barry Polley 758 A/SA
California- No place to race!
Barry Polley is offline   Reply With Quote
Old 05-14-2007, 08:00 PM   #8
rallye bob
Member
 
rallye bob's Avatar
 
Join Date: Sep 2006
Location: Genoa, Illinois
Posts: 488
Likes: 8
Liked 6 Times in 4 Posts
Default

Ever try the Hoosier 30 x 9 radial slick? I run them on my 3500 lb. 10.97 et @ 122 mph car. I run 20-22 psi, and it drives like it is on rails. I swap the tires side, to side every 20 or so passes.

rallye bob is offline   Reply With Quote
Old 05-15-2007, 09:12 AM   #9
CCRT
Junior Member
 
Join Date: May 2007
Location: Westford, MA
Posts: 3
Likes: 0
Liked 0 Times in 0 Posts
Default

Thanks for all the good info here.

We have absolutely no issues at speeds less than 135.


M/T tech stated it could be the Radial rear vs. Bias fronts that are causing the issue. They suggested going down on the pressure of my front tires. (Currently 40-38 psi). They also suggested looking at their S/R series front radials. When I checked out the specs I found they are only rated for 130 mph.

I?m beginning to think that it?s all sidewall related.

Some of the faster cars (160 mph plus) run the ET Street Radials but a set would be 30 lbs heavier. I don?t think they have issues because of the beefier sidewall in the DOT tire.

I?ll try going up on the pressure but unless the track is optimum it could cause a lot of inconsistencies at launch.


--Dave

1967 Camaro, Street Legal, Naturally Aspirated 406 SBC, 3400#, 9" tires 10.03 @ 132.48 1.40 60' Through the exhaust & Foot-Brakin'
9.07@147 with a little juice :-)
http://home.comcast.net/~ccrt-racing/ccrt.htm
CCRT
--Dave
CCRT is offline   Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 05:11 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.