|
03-25-2014, 01:25 PM | #1 |
VIP Member
Join Date: Oct 2013
Location: Gulf Breeze, FL
Posts: 1,655
Likes: 8
Liked 33 Times in 16 Posts
|
Wanted - Quadrajet metering rods
Looking for secondary metering rods - DM, CF, DG or DF.
__________________
Rich Taylor I/SA - 321 |
03-25-2014, 02:53 PM | #2 |
Junior Member
Join Date: Dec 2005
Location: Comfort Texas
Posts: 92
Likes: 66
Liked 51 Times in 3 Posts
|
Re: Wanted - Quadrajet metering rods
|
03-25-2014, 03:26 PM | #3 |
Member
Join Date: Mar 2006
Location: EL PASO, TEXAS
Posts: 156
Likes: 0
Liked 2 Times in 2 Posts
|
Re: Wanted - Quadrajet metering rods
Try www.quadrajetparts.com they have just about everything.....
|
03-25-2014, 06:55 PM | #4 |
VIP Member
Join Date: Oct 2013
Location: Gulf Breeze, FL
Posts: 1,655
Likes: 8
Liked 33 Times in 16 Posts
|
Re: Wanted - Quadrajet metering rods
That's where I get most of my parts, but the richest rod they have is AX.
__________________
Rich Taylor I/SA - 321 |
03-26-2014, 08:27 AM | #5 |
VIP Member
Join Date: Dec 2002
Location: Lower Dakota territory
Posts: 1,173
Likes: 1,023
Liked 772 Times in 231 Posts
|
Re: Wanted - Quadrajet metering rods
Rich, I checked out my stash....nothing richer than the AX's (.397 tip).
The DF and DG's are virtually identical (.340). Other .340 tip dia. rods are the DU, DS and CF if that helps your search. Here's the GM number on a couple of the rods: -DF: 7048512 -DG: 7048890 -CF: 7044775 The EF's @ .567 are good candidates for lathe turning to what you need. You might want to try Dean Oliver @ Deano's Carbs: http://deanoscarbs.com/
__________________
"That'll never work....." |
03-26-2014, 09:15 AM | #6 |
VIP Member
Join Date: Oct 2013
Location: Gulf Breeze, FL
Posts: 1,655
Likes: 8
Liked 33 Times in 16 Posts
|
Re: Wanted - Quadrajet metering rods
Thanks Alan - I may have to have some modified if I don't locate any.
__________________
Rich Taylor I/SA - 321 |
03-26-2014, 10:40 AM | #7 |
VIP Member
Join Date: Sep 2002
Location: Williamsburg, Va.---USA
Posts: 1,827
Likes: 1,612
Liked 56 Times in 27 Posts
|
Re: Wanted - Quadrajet metering rods
Rich,
Try allcarbs.com , they carry everything you need for Carbs ....There number is 631-234-8327 , everything from gaskets, jets, pumps , etc.... Cool place, hope this helps ?
__________________
Dave Ribeiro 1033 STK |
03-26-2014, 12:09 PM | #8 |
VIP Member
Join Date: Oct 2013
Location: Gulf Breeze, FL
Posts: 1,655
Likes: 8
Liked 33 Times in 16 Posts
|
Re: Wanted - Quadrajet metering rods
Thanks for all the info guys...I have been to all the sites, but no luck yet. Recently enlarged the secondary well orifices from .136 to .146 on several test carbs...unsure how that will scale vs given metering rods. I can get a "CC" rod, but I fear that is going to be just too large a jump to be useful. Was hoping to have one set of rods in the above mentioned range to test in several carbs at my next TNT session.
__________________
Rich Taylor I/SA - 321 |
03-26-2014, 06:16 PM | #9 |
Senior Member
Join Date: Sep 2007
Posts: 574
Likes: 6
Liked 44 Times in 22 Posts
|
Re: Wanted - Quadrajet metering rods
I might have some of them.
|
03-27-2014, 01:56 PM | #10 |
Junior Member
Join Date: Oct 2011
Location: WISCONSIN
Posts: 50
Likes: 0
Liked 3 Times in 1 Post
|
Re: Wanted - Quadrajet metering rods
I bought a pair from Quadrajetparts.com last year that are .0300 L
# Q 2600-CC there in my carb now from the end of last year. |
|
|