|
01-21-2019, 01:36 PM | #91 | |
VIP Member
Join Date: Oct 2002
Location: On a hilltop in Pa.
Posts: 4,218
Likes: 3,091
Liked 6,772 Times in 1,519 Posts
|
Re: Fly Weights
Quote:
The Chevy II 4s were used by Mercury Marine for a very long time. I know they survived into the 1990s and maybe later.
__________________
Billy Nees 1188 STK, SS Make tech "TECH" again! |
|
Liked |
01-21-2019, 02:41 PM | #92 |
VIP Member
Join Date: Apr 2002
Location: Coarsegold, CA
Posts: 1,017
Likes: 57
Liked 321 Times in 101 Posts
|
Re: Fly Weights
How about a 1982 Camaro with a 151ci Iron Duke 90HP / 120 NHRA HP
U/S or U/SA at 2570# OR SS/PA or SS/P at 120 NHRA HP and 2210# min weight... Too bad that the Quad-4 never came in a rear wheel application, I think????? That was a very trick engine…..
__________________
Bob Mulry 7516 STK A & M Motorsports Last edited by Bob Mulry; 01-21-2019 at 06:14 PM. |
01-21-2019, 05:37 PM | #93 |
Veteran Member
Join Date: Mar 2002
Location: Miles From Nowhere
Posts: 7,414
Likes: 2,579
Liked 4,447 Times in 1,693 Posts
|
Re: Fly Weights
Also in Mail Jeeps. That's the source of the Chevy pattern 904's ,later used in Comp.
The story is they would have been real dogs, fully loaded, with a PG.
__________________
We are lucky we don't get as much Government as we pay for..... Will Rogers |
01-21-2019, 06:40 PM | #94 |
Senior Member
Join Date: Mar 2007
Location: Harahan, La.
Posts: 521
Likes: 41
Liked 81 Times in 35 Posts
|
Re: Fly Weights
Friend of mine's father bought three old mail jeeps for his pest control business. I drove one at Southland Dragway in Houma around 1974. If I remember it ran 24 seconds with the sliding door opening on the leave.
Greg |
01-21-2019, 07:09 PM | #95 |
VIP Member
Join Date: Jun 2007
Location: Northern New Jersey suburbs
Posts: 2,275
Likes: 25
Liked 510 Times in 200 Posts
|
Re: Fly Weights
The Iron duke was used in various cars when I worked as a line mechanic in the mid to late 70’s. It had both intake and exhaust ports on one side of the head around 1976 and was changed the following year to intake on one side and exhaust on the other side. Many engines from all manufacturers were used in industrial applications long after they were discontinued in vehicles. The iron duke was one used a lot to power generators as well as marine engines. It had a very long life in various configurations!
__________________
Rich Biebel S/C 1479 |
03-21-2020, 06:57 PM | #96 |
VIP Member
Join Date: Oct 2002
Location: On a hilltop in Pa.
Posts: 4,218
Likes: 3,091
Liked 6,772 Times in 1,519 Posts
|
Re: Fly Weights
maybe just one more.
__________________
Billy Nees 1188 STK, SS Make tech "TECH" again! |
03-21-2020, 07:06 PM | #97 |
Member
Join Date: Jan 2014
Location: SoCal
Posts: 232
Likes: 274
Liked 167 Times in 81 Posts
|
Re: Fly Weights
How do guys with late model Fords deal with that variable venture carb?
__________________
Tim Schmackpfeffer 762 SS |
03-21-2020, 09:14 PM | #98 | |
Veteran Member
Join Date: Mar 2002
Location: Miles From Nowhere
Posts: 7,414
Likes: 2,579
Liked 4,447 Times in 1,693 Posts
|
Re: Fly Weights
Quote:
Nobody has had to use one with a 302 yet.. It might come to that, eventually. Take a look down through one, with the throttle plates and the top flapper open, and let us know what you see ;-)
__________________
We are lucky we don't get as much Government as we pay for..... Will Rogers |
|
03-21-2020, 09:41 PM | #99 |
Member
Join Date: Feb 2006
Location: Maryland USA
Posts: 496
Likes: 98
Liked 189 Times in 64 Posts
|
Re: Fly Weights
How about one of the 68-74 Opels in the Guide? A 1971 Opel 2-dr sedan or wagon with the 115/75 2bbl L-4 has a minimum weight with driver in T of 1880lbs. It can go as low as 1790lbs in R.
|
03-21-2020, 10:13 PM | #100 |
Member
Join Date: Jul 2002
Posts: 385
Likes: 1
Liked 299 Times in 56 Posts
|
Re: Fly Weights
|
|
|