SBC/G-body stuffage for sale or trade:

John N · 02-14-2007, 10:00 PM

SBC/G-body stuff for sale or trade:

Used unless it says otherwise. Open to package deals and trades. Shipping is not a problem. I'm in 08080 NJ. May add pictures later, but for now you can cruise photobucket and you'll most likely find what you're looking for.

JohnNeville@Gmail.com / 856 905 1908 CELL

http://s44.photobucket.com/albums/f11/SS86/?start=all

$2000--Hand ported Dart Pro 1 heads flowing over 300@.700. Coated chambers, Manley severe duty valves, cryo treated springs, 1.7 comp magnum rockers, girdles, cast Chevrolet valve covers, etc.
$300--th350 tranny with TCI shift kit and I believe a manual valve body. Shifted fine when last in use
$250--Crower solid roller lifters 290-66200
$200--8" Fluidampr internal balance 350
$150--Schneider roller cam 33350. .630" lift, 282@.050" duration, 322 adv duration, 112 LSA, 4000-8000rpm
$100--New Comp 7972 pushrods
$75--78 Malibu bare frame. Not bad, but some body mount holes in the rear aren't as round as they used to be.
$50--TCI circle track valvebody
$25--Stock style servo and cover from TCI powerglide
$25--87 Monte carlo LS front bumper cover
$25--Steel powerglide pan
$25--Stock Malibu front sway bar
$25--Stock Malibu upper rear control arms
$25--Stock Malibu power steering box/pitman arm

SOLD--$2000--LS1 with 70K and LS6 intake. No ECM. Needs a few parts
SOLD--010 high nickel SBC 350 block. ARP studded 4 bolt billet mains, screened, plugged, decked, line honed, .030" over, coated bearings included, etc...
SOLD--MSD digital 6
SOLD--Glasstek pin on (10 dzues) 5" Malibu hood
SOLD--$200--6 1/4" Fluidampr internal balance 350
SOLD--Stock 3.73 posi 8.5" gears, posi, axles
SOLD--67-69 F-body/68-74 Nova 1 5/8" Hedman headers/Dynomax Ultraflo bullets
SOLD--Smooth 78 Malibu front/rear bumpers
SOLD--Edelbrock RPM spread bore dual plane intake
SOLD--Cloyes hex-adjust double roller with tensioner
SOLD--Circle track valve covers with dual breathers

John N · 02-17-2007, 12:50 AM

Hood is gone. 8.5" guts will be soon.

John N · 02-17-2007, 12:26 PM

Digital 6+ has been sold

Todd Bailey · 02-17-2007, 12:43 PM

E-mail address or phone number?

Todd

John N · 02-17-2007, 04:00 PM

I forgot to update this with my info. Sorry about that!

JohnNeville@Gmail.com / 856 905 1908 CELL

John N · 02-18-2007, 12:45 AM

Valve covers are gone

John N · 02-18-2007, 10:04 PM

Bumpers are going to a new home

Lyn Smith · 02-21-2007, 09:12 PM

would be inteested in the 8.5 stuff if the deal falls thru. Lyn 815 844 7852

Lyn Smith

John N · 02-22-2007, 12:19 AM

I'll let you know if it falls through.

John N · 02-24-2007, 07:46 PM

8.5" guts are sold!

02-14-2007, 10:00 PM	#1
John N Junior Member Join Date: Dec 2006 Location: 08080 South Jersey Posts: 63 Likes: 0 Liked 0 Times in 0 Posts	SBC/G-body stuffage for sale or trade: SBC/G-body stuff for sale or trade: Used unless it says otherwise. Open to package deals and trades. Shipping is not a problem. I'm in 08080 NJ. May add pictures later, but for now you can cruise photobucket and you'll most likely find what you're looking for. JohnNeville@Gmail.com / 856 905 1908 CELL http://s44.photobucket.com/albums/f11/SS86/?start=all $2000--Hand ported Dart Pro 1 heads flowing over 300@.700. Coated chambers, Manley severe duty valves, cryo treated springs, 1.7 comp magnum rockers, girdles, cast Chevrolet valve covers, etc. $300--th350 tranny with TCI shift kit and I believe a manual valve body. Shifted fine when last in use $250--Crower solid roller lifters 290-66200 $200--8" Fluidampr internal balance 350 $150--Schneider roller cam 33350. .630" lift, 282@.050" duration, 322 adv duration, 112 LSA, 4000-8000rpm $100--New Comp 7972 pushrods $75--78 Malibu bare frame. Not bad, but some body mount holes in the rear aren't as round as they used to be. $50--TCI circle track valvebody $25--Stock style servo and cover from TCI powerglide $25--87 Monte carlo LS front bumper cover $25--Steel powerglide pan $25--Stock Malibu front sway bar $25--Stock Malibu upper rear control arms $25--Stock Malibu power steering box/pitman arm SOLD--$2000--LS1 with 70K and LS6 intake. No ECM. Needs a few parts SOLD--010 high nickel SBC 350 block. ARP studded 4 bolt billet mains, screened, plugged, decked, line honed, .030" over, coated bearings included, etc... SOLD--MSD digital 6 SOLD--Glasstek pin on (10 dzues) 5" Malibu hood SOLD--$200--6 1/4" Fluidampr internal balance 350 SOLD--Stock 3.73 posi 8.5" gears, posi, axles SOLD--67-69 F-body/68-74 Nova 1 5/8" Hedman headers/Dynomax Ultraflo bullets SOLD--Smooth 78 Malibu front/rear bumpers SOLD--Edelbrock RPM spread bore dual plane intake SOLD--Cloyes hex-adjust double roller with tensioner SOLD--Circle track valve covers with dual breathers

02-17-2007, 12:50 AM	#2
John N Junior Member Join Date: Dec 2006 Location: 08080 South Jersey Posts: 63 Likes: 0 Liked 0 Times in 0 Posts	Hood is gone. 8.5" guts will be soon.

02-17-2007, 12:26 PM	#3
John N Junior Member Join Date: Dec 2006 Location: 08080 South Jersey Posts: 63 Likes: 0 Liked 0 Times in 0 Posts	Digital 6+ has been sold

02-17-2007, 12:43 PM	#4
Todd Bailey Member Join Date: Dec 2003 Location: Houston Posts: 302 Likes: 24 Liked 28 Times in 14 Posts	E-mail address or phone number? Todd

02-17-2007, 04:00 PM	#5
John N Junior Member Join Date: Dec 2006 Location: 08080 South Jersey Posts: 63 Likes: 0 Liked 0 Times in 0 Posts	I forgot to update this with my info. Sorry about that! JohnNeville@Gmail.com / 856 905 1908 CELL

02-18-2007, 12:45 AM	#6
John N Junior Member Join Date: Dec 2006 Location: 08080 South Jersey Posts: 63 Likes: 0 Liked 0 Times in 0 Posts	Valve covers are gone

02-18-2007, 10:04 PM	#7
John N Junior Member Join Date: Dec 2006 Location: 08080 South Jersey Posts: 63 Likes: 0 Liked 0 Times in 0 Posts	Bumpers are going to a new home

02-21-2007, 09:12 PM	#8
Lyn Smith VIP Member Join Date: Dec 2001 Location: Pontiac,il. Posts: 1,121 Likes: 217 Liked 841 Times in 156 Posts	would be inteested in the 8.5 stuff if the deal falls thru. Lyn 815 844 7852 Lyn Smith

02-22-2007, 12:19 AM	#9
John N Junior Member Join Date: Dec 2006 Location: 08080 South Jersey Posts: 63 Likes: 0 Liked 0 Times in 0 Posts	I'll let you know if it falls through.

02-24-2007, 07:46 PM	#10
John N Junior Member Join Date: Dec 2006 Location: 08080 South Jersey Posts: 63 Likes: 0 Liked 0 Times in 0 Posts	8.5" guts are sold!